Description
- A condenser microphone with frequency response tuned for high intelligibility as a communications device is used.
- Unidirectional large-diameter microphone element with excellent frontal sound collection with minimal ambient sound coverage.
- Shielded microphone head with metal vapor deposition plating.
- Isolating transformer is mounted to reduce hum noise.
- Long-stroke non-contact PTT key, as used on the M-1 high-end reference microphone.
- PTT keys with non-slip honeycomb surface finish.
- Equipped with PTT lock key.
- Built-in low-frequency cutoff (LC) active filter (with ON/OFF switch on the bottom)
- Cutoff frequency 340Hz, -6dB/oct
- Up/down angle adjustment and front/rear microphone position adjustment.
- Large, stable base stand.
- Compatible with transceivers with round 8-pin microphone connector and 8-pin modular microphone connector.
- (8-pin round - 8-pin modular curly cord microphone cable included)
Compatible transceivers】 As of February 2021
FTDX10, FTDX101, FTDX9000, FTDX5000, FTDX3000D, FTDX1200, FT-891,
FT-891, FT-450/D, FT-991/FT-991A, FT-857/D, FT-818ND, FT-817/ND
FT-2000/D, FT-1000MP, FT-1000MP MARK-V, FT-950, FT-920
FT-900, FT-897/D, FT-847, FT-1021 *1, FT-1011 *1, FT-1000 *1
FT-850 *1 , FT-840 *1 , FT-747 *1
*1: Optional power supply kit (sold separately) is required for connection.
[Rating]
Microphone type: Electret condenser type
Power supply voltage: DC5.0V ±10
Frequency range: 30 - 17000Hz
Sensitivity: -60dB (1kHz 0dB=1V/1Pa)
Microphone impedance: 600 Ω
Dimensions (excluding protrusions): Stand: 106 mm (W) x 157 mm (H) x 126.5 mm (D) (when horizontal/excluding protrusions)
* Height 170 mm: when microphone is mounted (maximum when horizontal)
Microphone : φ40mm x 170mm
Weight ： Approx. 450g (excluding microphone cable)