What
is the difference between Woolwax® and other lanolin film fluid type products ?
Woolwax™ is made from
lanolin/woolgrease. It contains more woolgrease and is more resistant to
wash-off than competitive products. In short...Woolwax™ lasts much longer, has
almost no smell, very little over-spray because it is thicker, and is available
in clear and Black.
The other well-known lanolin spray (Funky Film) is marketed
as a multipurpose product (Boot spray, leather softener, wood
treatment, penetrant, lubricant, corrosion inhibitor, zipper lube, etc. ).
To do that they must stay very low viscosity. As an auto/truck undercoating
Funky Film performs poorly because it washes off very quickly. We recognized
that we cannot be everything to everybody. Woolwax™ is formulated primarily as
an auto/truck corrosion inhibitor/rust preventive that will withstand the
outdoor elements and is very resistant to wash-off.
Bottom line.....Woolwax™ will provide protection much
longer than thin low viscosity products.
* Woolwax™ will provide undercarriage corrosion protection for up to 2 years.
What is Woolwax™ ?
Woolwax™ is a lanolin (woolgrease) based, solvent free
corrosion preventive designed for use on any known
metal. Woolwax™ has a thixotropic viscosity that allows for a thick
and drip free coating. Woolwax™ leaves a soft, grease-like self-healing
film that can be applied by brush or spray applicator
gun. Woolwax™ will not dry out and will penetrate metals to the base,
providing corrosion protection in highly corrosive atmospheres like those found
in industrial or environmental settings. Woolwax™ has proven to be an
exceptional vehicle undercoating product.
Woolwax™ will provide excellent rust protection for any vehicle for up to
(2) full years. Because Woolwax™ is solvent free, there is no
evaporation process. Woolwax™ coating in protected areas such as
doors, frame rails, rocker panels, etc. will provide protection indefinitely
(years). The exposed area of the vehicle undercarriage is an annual maintenance
application. A Woolwax™ treatment in the fall is generally adequate
to get the vehicle undercarriage through the winter/salt
season. Woolwax™ is not a rust remover or converter,
however Woolwax™ can be applied over existing surface
rust. Woolwax™ will form a heavy film and prevent moisture and oxygen
from reaching the existing rust. Thereby stopping it on contact. Heavy bubbling
or flaking rust should be wire brushed before applying Woolwax™.