MT2 Live Tailstock Chuck Adapter 1" by 8 TPI with Male Thread Mounting
- Converts your lathe's #2MT dead tailstock to 1" x 8tpi threaded live tailstock
- Mounts to tailstock with the included #2 Morse Taper arbor
- After being mounted, tailstock is converted from dead to live and it will accept all 1" x 8tpi threaded lathe tool accessories
- Ideal for an additional secure workpiece mount from tailstock end; Allows precision centering of spindles or dowels at the tailstock end; Provides the ideal system for the mounting of bowls for hollowing
Product Specification:
* Now you can mount your chuck on the tailstock with a smooth bearing
* Provides a 1-Inch by 8 TPI spindle at the tailstock end
* Gives you precision centering at the tailstock
* Ideal for an additional secure mount from the opposite side
* Retains the exact center at all times
From the Manufacturer
Live Tailstock Chuck Adapter-2MT tailstock mount, 1-Inch by 8TPI Chuck Mount. This unique adapter allows precision centering of spindles or dowels at the tailstock end. Also, it provides the ideal system for the mounting bowls for hollowing; after turning the outside of the bowl blank, turn a tenon on the bowl bottom. Then mount your chuck to the tailstock using this adapter; grabbing the tenon with the chuck while still attached to the faceplate. When the chuck and blank is remounted on the headstock, your bowl will be perfectly centered.
100% original every product has a unique batch number for authentication safely packed. Discounts on bulk purchase.
**Due to high demand, some items might be currently unavailable in our USA warehouse.
To avoid any delays, your order may ship directly from India. But don't worry, this won't affect your delivery timeframe! You'll still get your parcel on time, just as promised.**