WeePro Vpro850L Digital Multimeter
Electrical Troubleshooting Necessities
The multimeter is a basic assistant to test & troubleshoot a variety of automotive and household electrical problems safely and accurately. This WeePro Digital Multimeter Voltmeter Ohmmeter Ammeter meets your demands. Adopting durable material, it is tough enough to be used for a long time. Besides, it can be used in measuring remaining capacity of the rechargeable battery, so as to check whether the battery is fully-charged. Don't hesitate to bring it home now!
- VERSATILE DIGITAL MULTIMETER: Suitable for all kinds of household use and industrial use. Can be use at Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc. It is a AC/DC Voltmeter, Ohm Volt Amp Tester, Electric Ohmmeter, Diode, Resistance and Audible Continuity Detector.
- Troubleshooting with Speed and accuracy: This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.
- Electronic Tester Multimeter with Over-load Protection and Low-Power Reminder: Use the PTC protection circuit for Resistance, and frequency measurement. Over-load indication "1" will be displayed; Low battery indication will be displayed when battery power is low.
- Built in Audible Continuity Test Voltmeter and Data Hold : Buzzer will work if the resistance is lower than 30Ω±20Ω; Data Hold Function for clear reading; The Weepro digital multimeter comes with an insulated rubber case kickstand to help better grips and easier reading, and with the ABS material use at the same time provide users maximum safety.
- BUY WITH CONFIDENCE: All sales come with 90-day return refund guarantee, 10-year warranty and lifetime supported by WeePro; Battery / Two 80cm Test Leads / User Manual are Included
INTRODUCTION
PART 1
- DISPLAY: 3½ digit LCD.
- FUNCTION & RANGE SWITCH
Our CMM adopt rotational switch which situated at the middle of the front case. It is used for the selection of FUNCTION and RANGE .
- POWER ON-OFF
In order to save energy, please turn the switch to "OFF" position when not in use.
PART 2
- "COM" jack -- Common jack.
- " V?mA" jack -- Voltage, resistance, not more 200mA current, temperature and battery input test jack.
- "10ADC"jack -- For the input of more than 200mA current.
Specifications:
- 1. DC Voltage: 200mV-600V ±(0.5?±2dgts)
- 2. AC Voltage: 200/600V ±(1.2?±10dgts)
- 3. DC Current: 200uA-10A ±(1.0%+2dgts)
- 4. Resistance: 200??2M? ±(0.8?±3dgts)
- 5. Power supply: 9V,6F22
- 6. Max. display: 1999
- 7. Diode: Yes; Dynatron: Yes; LCD Backlight: Yes; Continuity Buzzer: Yes; Low Battery Indication:Yes; Data Hold: Yes
- 8. Input Impedance for DCV: 1M?
- 9: Sample Rate: 3times/S
- 10: LCD Size: 70 x 40mm
DATA HOLD
The switch is used to hold the display reading when the instrument is disconnected from whatever was being measured.
BACKLIT LCD
Large digital display with backlit LCD for visibility in dimly light areas.When BACK LIGHT is turned on. It needs to be turned off by user manually. (This function was revised according to our lovely customers' suggestion, it is more practical and safer in fact. Thank you all.)
Large LCD Screen
70 x 40mm big LCD screen, word size up to 25mm.The best display visual angle is approx 70°
Features
- CMOS integrated circuit and dual slope A/D conversion, auto zero and select polarity
- It will auto turn off after starting up 25 minutes
- High reliable measure range and 32 gears are more effective to avoid false operation
- Support transistor and Diode test
- Newest design and high quality
TECHNNICAL SPECIFICATION
- Accuracy: ±a% of reading: ± N0 digits guaranteed for l year.
- Environmental temperature : 23±2.
- Relative Humidity: <75%.