Description

CA SELLER Waterproof Inkjet Milky Transparency Film for Silk Screen 17" x 100FT

6 Roll/pack

Contact Us:
If you need our products in large quantities, or you want to become an agent or distributor, please contact us and we can provide the lowest price in the market.

Film inkjet film allows screen printers to output films faster, use less ink, achieve ultimate black density and reuse the film positive time and time again.

Description:
Size:17" x 100FT
Caliper/ thickness: 5 mil
Ink Support: dye/pigment(water based)
Inner core: 2"
UV DMIN <1.0
UV DMAX >4.0
Printing side is the non-smooth side, wet finger will stick to the coated side.

Features and Benefits:
Dimensionally stable film means great registration and no curling
Quick dry time equals faster production times and less ink usage
Accurate dot placement results in excellent line definition and acuity
High ink load capacity
Great film opacity
Minimal "yellowing" allows the film to retain the image over time and be used repeatedly

Storage Instructions:
Temp 59 - 86° degrees F (15 - 30° C)
Repack opened rolls or boxes when not in use
Allow material to stabilize to room conditions for 24 hours before use
Product Support Information:
Side of the film to print on: waterproof film has two sides, the carrier sheet side and the inkjet receptive side. To determine which side is the inkjet receptive side, dampen your finger and touch a corner of the film, the side that is sticky is the side that will take ink.

Printer Settings for Best Results:
Epson or other inkjet printers: Open your printer utility driver in the print queue menu. Set your image settings to "best quality photo" or "best image", this will enable your printer to print at its max resolution. Set your paper settings to "premium glossy photo paper" or similar, this allows most printers to lay down the maximum amount of ink.

AccuRip Print Settings for Rite Film Waterproof Film:
All black systems w/ AccuRIP: typically all black systems can run as fast as 720x720 resolution with a 11-13 droplet weight with bidirectional printing turned off. We recommend printing your own droplet weight test to accomplish this.

Samples: