Water Meter Idler/Spacer Tube for 5/8" x 1/2" Meter, 7.5" long w/Meter Couplings

$32.9
Brand
Utility Technologies
Meter Couplings Material
Lead Free Brass
Fits Meter Thread Size
1/2" Meter Thread (~1" O.D.)
Meter Idler Lay Length
7.5"
Bundle Description
1 Meter Idler, 2 meter couplings, 2 gaskets
Idler Tube Material
PVC - Schedule 40
Custom Bundle
Yes
Meter Coupling Nipple Threads
1/2" NPT
Model
Idler-58-75 + MCPLG-58 (x2)
MPN
Idler-58-W/CPLGS
Country/Region of Manufacture
United States
condition
New
Water Meter Idler Tube
Spacer Tube
For 5/8" x 1/2" Water Meter
With 1 set of meter couplings for 5/8"x 1/2"

This Idler tube can be used for two major purposes, New Construction or meter replacement. It is the same thread size and lay length as a water meter. In new construction, this can be used for correct plumbing spacing and temporary water if a meter is not yet available.

New Construction:
  • Used to properly space meter couplings or meter valves when the water meter is not yet available.
  • Light weight PVC is easier to use for initial plumbing in of meter couplings than a heavy brass water meter
  • Can be used to plumb for a future water meter to be installed at a later date while allowing water and the place for the meter.
  • HOA's, Apartment Owners, and Mobile Home Park owners, and shopping centers can use to allow later retrofit of submetering systems without total re-plumbing.
Meter Replacement
  • A meter idler tube can be used to supply water temporarily if a meter is removed for repair or testing
  • Can be used for flat rate billing when plumbing is done in anticipation of a future utility or submetering water meter being installed.
  • Can be used for seasonal buildings where you don't want to leave the meter in line for potential water meter freezing in winter.
  • Note: May not fit in setters that have a support ear on the swivel nut. See photos

Specs:
  • For proper spacing of a 58" (5/8" x 1/2") water meter meeting AWWA specification (USA/Canada)
  • INCLUDES: 2 - meter couplings with gaskets (1/2" NPT male x 5/8" AWWA meter Threads x 2.5" long)
  • Lay Length 7-1/2"
  • Fits AWWA 1/2" Water Meter Coupling Thread (Approx 1/2" I.D. and 1" O.D.).
  • Material PVC Plastic - exterior painted gold
  • NSF approved materials for drinking water
  • Note: For 5/8" x 3/4" and larger meters, see our other listings
Warning: Do not install when connected to a public water system without express permission of the water system owner. Bypassing a water meter or connecting and using water without permission is usually a violation of policies and/or local laws. Illegal connection to a public water system or use of water is typically a crime and could subject you to fines, penalties, or permanent banning from the utility.