The waste oil centrifuge has a flow rate capacity of 1 gallon per minute (GPM), or 60 gallons per hour.
Processing a 55-gallon drum of oil takes approximately 60 minutes, though actual time may vary depending on oil viscosity. Operating at 85 PSI, the centrifuge spins at 8,800 RPM, generating a centrifugal force 2,000 times greater than gravity. A 1/3 horsepower motor with a pump is required for operation.
This waste oil centrifuge is capable of filtering waste vegetable oil, motor oil, hydraulic oil, gear oil, and can also dewater biodiesel. It effectively removes Magnesol with multiple passes and can separate glycerin without the need for heating, though more than one pass may be necessary.
You can build a complete WVO (waste vegetable oil) filtration unit using this centrifuge, along with a gear pump and drum heater. The system can clean oil to below 1 microns while simultaneously dewatering. Oil filtering has never been easier.
Contact us for pump and heater requirements.
Shipping out side USA has additional shipping cost.