Caster kit contains (2) two swivel with brake casters with (6 in. x 2 in.) Phenolic wheels & (2) two rigid casters with two (6 in. x 2 in.) Phenolic wheels.
This kit also includes 16 one-inch long bolts (5/16"), 16 nuts (5/16") & 16 washers to mount the casters to VulcanHart or Hobart Convection Oven.
For models: ECO4C, EC04D, EC04S, EC06C, EC06D
Each heavy duty caster in this kit can hold up to 1200 lbs per caster. All four casters together give you a total capacity of 4800 lbs for all your tools.
These caster give you an overall height of 7-1/2 inches from the ground.
Phenolic wheels are a great alternative to steel wheels. Phenolic wheels give you similar capacities to steel wheels, however, they provide better floor protection, slightly quieter rolling, do not rust, & are more economically priced. Phenolic wheels are made using phenolic resin mixed with macerated canvas which yields a high capacity & high impact wheel. They have hard treads & will not flat spot over time which is why they are often used on equipment with heavy loads. Phenolic wheels are resistant to oil, grease & solvents. They are also non-metallic & non-sparking.
PLEASE CONFIRM FOR YOURSELF PRIOR TO PURCHASING. Check the photos for exact dimensions (4-1/2 in x 4 in. plate). Contact Mapp Caster & Supply for Help.