1.Can be used to create seals and gaskets that is reusable.
2.Sensor-safe,non-corrosive formula designed for superior adhesion to oily surfaces and long term durability.
3.Designed specially for high-torque and high vibration applications.
4.Stands temperature from -80°F to 600°F (-27°C to 315°C).
5.Compliance with SGS/ROHS/REACH certification.
Application
Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers.
Also for Home, Auto, Boat, RV, Industrial and Construction etc.
Directions
1.Surfaces must be clean, dry and oil free.
2.Pierce seal at the end of the metal tube with reverse and cap.
3.Screw on nozzle and cut to desired bead size.
4.Apply even bead silicone around perimeter of surface.
5.Assemble part once silicone has skinned 8 to 12 minutes.
6.Remove excess silicone.
7.The silicone will dry in 1 hour and cure completely in 18 to 24 hours.
Cautions
Uncured sealant causes eyes skin irritation. In case of eye contact, flush with water and call your medical advisor immediately.
Keep Out Of Reach of Children!
