Vanquish Products
Titanium Hardware VRD Chassis Kit
VPH22003
Titanium Hardware Kit – Vanquish Products VRD Chassis
This kit includes lightweight, high-strength titanium screws to replace the standard hardware used when assembling the VRD Chassis. Titanium offers an excellent strength-to-weight ratio and corrosion resistance—ideal for performance-focused builds.
Note: M3 nylock nuts are not included. Titanium nylocks are not recommended for use with titanium screws. See installation instructions below for details.
Installation: Follow the instructions below to prevent damage to components or hardware.
Includes:
22x M3x8mm Buttonhead
2x M3x14mm Buttonhead
2x M3x16mm Buttonhead
2x M3x22mm Buttonhead
2x M3x30mm Buttonhead
4x M3x40mm Buttonhead
2x M3x8mm Flathead
Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.
When installing into plastic:
Do not use lubricant.
Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
Avoid using impact drivers.
When installing into metal or threaded inserts:
Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124
Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
Torque values should be reduced by 20–30% compared to steel fasteners.
Ensure threads are clean and lubricated before installation.
Avoid dry fitting and use hand tools for final torque.
Failure to follow these guidelines may result in damaged threads or seized fasteners.
This kit includes lightweight, high-strength titanium screws to replace the standard hardware used when assembling the VRD Chassis. Titanium offers an excellent strength-to-weight ratio and corrosion resistance—ideal for performance-focused builds.
Note: M3 nylock nuts are not included. Titanium nylocks are not recommended for use with titanium screws. See installation instructions below for details.
Installation: Follow the instructions below to prevent damage to components or hardware.
Includes:
22x M3x8mm Buttonhead
2x M3x14mm Buttonhead
2x M3x16mm Buttonhead
2x M3x22mm Buttonhead
2x M3x30mm Buttonhead
4x M3x40mm Buttonhead
2x M3x8mm Flathead
Installation Notice for Titanium Hardware:
Titanium fasteners require specific installation practices to prevent damage or failure.
When installing into plastic:
Do not use lubricant.
Hand-tighten only—do not overtighten, as titanium threads can easily strip plastic.
Avoid using impact drivers.
When installing into metal or threaded inserts:
Always use anti-seize lubricant (nickel- or moly-based) to prevent thread galling. e.g. Permatex 77124
Do not pair titanium screws with titanium nylock nuts. Use stainless steel or aluminum nylock nuts instead.
Torque values should be reduced by 20–30% compared to steel fasteners.
Ensure threads are clean and lubricated before installation.
Avoid dry fitting and use hand tools for final torque.
Failure to follow these guidelines may result in damaged threads or seized fasteners.
Pictured chassis not included. Pictured as an example only.