VALVE COVER ADAPTORS
429 or 460 Perimeter 7 Bolt Valve Covers
on 460 EFI Center Bolt Heads
1/2" Thick 6061 BILLET ALUMINUM
WITH GASKETLOK FEATURE
INCLUDES STAINLESS STEEL BOLTS AND WASHERS.
SOLD IN SETS (TWO SPACERS).
(Head not included just shown for display)
* We also sell this in a version for 6 bolt fabricated valve covers in our eBay store *
Made With Pride in Cochranton, Pennsylvania U.S.A. from 6061, U.S.A. Produced, Billet Aluminum!
Some Information about us.- We are a Manufacture of Billet Valve Cover Spacers and Adaptors.
- All of our Spacers and Adaptors are Made in USA with USA Made Materials.
- With Medice Manufacturing Valve Cover Spacers you no longer have to use tall valve covers to clear enhanced-performance valve train components.
- Utilize your factory valve cover (or any valve cover) and gain space for high performance valve train parts/components.
- We also manufacture valve cover adaptors / conversion kits to put different valve covers on different engines.
- Our GASKETLOK feature incorporates a relief cut in critical areas. This addition process causes the gasket material to become imbedded into the spacer providing a tighter grip of the gasket against the spacer surface. GASKETLOK is compatible will all premium gaskets on the market. The result is a better seal with greater gripping action to keep the gasket in place.
Some information about installing our valve cover spacers. - IF you are using an aftermarket aluminum head with a good, machined valve cover surface many people (including myself) just silicone the spacer to the head.
- IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
- IF your Head is as cast and rough, we recommend using a gasket between the spacer and the head.
- IF you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
- MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
- The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer.
- We also enclose an information sheet with each set of spacers sold.
Some Information about us.
- We are a Manufacture of Billet Valve Cover Spacers and Adaptors.
- All of our Spacers and Adaptors are Made in USA with USA Made Materials.
- With Medice Manufacturing Valve Cover Spacers you no longer have to use tall valve covers to clear enhanced-performance valve train components.
- Utilize your factory valve cover (or any valve cover) and gain space for high performance valve train parts/components.
- We also manufacture valve cover adaptors / conversion kits to put different valve covers on different engines.
- Our GASKETLOK feature incorporates a relief cut in critical areas. This addition process causes the gasket material to become imbedded into the spacer providing a tighter grip of the gasket against the spacer surface. GASKETLOK is compatible will all premium gaskets on the market. The result is a better seal with greater gripping action to keep the gasket in place.
- IF you are using an aftermarket aluminum head with a good, machined valve cover surface many people (including myself) just silicone the spacer to the head.
- IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer &valve cover.
- IF your Head is as cast and rough, we recommend using a gasket between the spacer and the head.
- IF you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.
- MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.
- The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines! Motorcraft Part number (TA31). You can get it at your local Ford Dealer.
- We also enclose an information sheet with each set of spacers sold.