V-Belt 2 Groove Long Water Pump Pulley Kit Black Steel for SB Chevy SBC 350

Description:

• 100% brand new, Never been tried or installed.
• This is a complete front pulley bracket kit. 

• Fits All Small Block Chevy Motors From 1958 to 1986 With LONG Water Pumps

• NOTE: Will not work with A/C applications

• NOTE: Will Not Fit Vortec Intake Manifolds Due To Bolt Angle

• NOTE: Will NOT Work LT1 Or LT4 Motors

• Note: Must Have Accessory holes in head for brackets to work

• Note: Power steering bracket can be mounted in a High Or Low position.The 2 holes next to the balancer on the engine block are used for the power steering bracket.Some blocks will need to be drilled and tapped to allow uses of the power steering bracket.Kit will not work with front engine mounts.

• Professional Installation is Highly Recommended​​

Package Includes:

• 1x New Black Steel Power Steering Bracket Kit

• 1x 2 Groove / Belt Black Steel Water Pump Pulley 

• 1x 2 Groove /Belt Black Steel Crank Pulley 

• 1x 1 Groove Black Steel Key Way Style Power Steering Pulley(Will NOT Fit Press on Power Steering Pumps)

• 1x New Black Steel Alternator Bracket Kit

• As shown in the picture above

• NOTE:  This kit may be delivered in several packages, please don't order if you mind

Power Steering Pump Pulley:

• Color: Black
• Pump Style: Saginaw
• Pully Style: V-Belt
• Groove Quantity: 1
• 1 groove V-belt for KEYWAY design. (NOT FOR PRESS-ON DESIGN)
• 5/8" bore diameter, 5-3/4" OD

Water Pump Pulley:

• PULLEY STYLE -V-Belt
• PULLEY DESIGN - Plain
• GROOVE QUANTITY - 2
• WATER PUMP STYLE - Long
• WATER PUMP SHAFT - 5/8"
• BOLT HOLE QUANTITY - 4
• PULLEY MATERIAL - Steel
• OUTSIDE DIAMETER - 6.25"
• UNDERDRIVE - No
• OVERDRIVE - No
• NOSE COVER - Not Included
• HARDWARE - Not Included

​

Crankshaft Pulley:

• PULLEY STYLE - V-Belt
• GROOVE QUANTITY - 2
• WATER PUMP STYLE - Long
• BOLT HOLE QUANTITY - 3
• PULLEY MATERIAL - Steel
• OUTSIDE DIAMETER - 6.900"
• UNDERDRIVE - No
• OVERDRIVE - No
• NOSE COVER - Not Included
• HARDWARE - Not Included

​

Mounting Brackets:

• Power steering pump bracket for your 1970-Later Small Block Chevy Engine with a short or long water pump. 
• Manufactured using high-quality aluminum, they are guaranteed to provide a perfect fit and secure grip.
• This bracket works for both Short & Long Water pumps, Single or Double Groove Pulley.
• This quality bracket fits a wide variety of applications due to its optional low or high mounting positions.  
• Mounts on the Drivers Side Bottom of the engine. All hardware to mount this kit are included.
• The power steering bracket mounts to the front of the lower driver side using the 2 lower bolt holes located by the timing chain cover (the old front mount holes).  
• The adjusting arm mounts to the lower water pump hole. No drilling or tapping required. 

Alternator Bracket ：

• Accessory Type: Alternator
• Bracket Material: Heavy Gauge Steel
• Water Pump Steel: Long
• Bracket Type: Upper&Lower
• Mounting Positon: Passenger Side
• Upper Mounting: Intake Manifold&Water Pump
• Lower Mounting: Water Pump
• Includes all necessary hardware to mount both the upper and lower bracket