This stamp is approximately 1.5" x 1.5".
These stamps are locally made in southwest Missouri. It started out of necessity for my leather business. As folks began to express an interest, I was asked to make them available here and elsewhere. I try to keep the price reasonable, just barely covering materials and shipping costs. Unfortunately, inflation keeps going up, making it hard to have anything reasonably priced.
Custom made acrylic stamps using laser engraving. This listing is for this stamp only.
The stamp makes a deep and crisp impression on cased leather.
The stamps are extremely durable and can be easily cleaned, scrubbed and sanitized.
These are perfect impressions to use on leather hat patches.
*******************SPECIAL NOTE**********************
These are made for use with an arbor press or by placing in a vise and applying slow, even pressure. These WILL NOT withstand hammer blows.
Arbor Press Instructions:
Place a piece of cased leather on a solid platform under the arbor press anvil. Place stamp on top of cased leather. Place a solid platform (can be metal or wood stock) on top of stamp. Apply downward pressure with arbor press and hold for 15-20 seconds. Check result. Repeat as necessary to achieve desired impression.
Vise Instructions:
Place cased leather and stamp between to hard objects (like a board). Squeeze tightly so stamp stays in place. Place all inside vise. Tighten vise and hold for 15-20 seconds. Release vise and check imprint depth. Repeat as necessary.
This stamp comes with a lifetime guarantee. If the stamp no longer produces an acceptable image, simply return it and a new one will be sent to you. Guarantee void if used in conjunction with a hammer.
Stamps are impressed into the leather using a press of some type. The images in the listing are created on a Harbor Freight Arbor Press with a thick piece of leather on top of the stamp to distribute the pressure. The leather must be cased (or wetted) using a wet sponge to moisten the entire piece of leather (If you don't wet all the leather, you will get water spots on the leather.
I have these stamps in stock and can produce custom logos as well.