|
|
|
|
Used CNC Permanent Magnetic Chuck 200N/cm² Magnetic Force 16x16inch Fine Pole Rectangular Chuck Super Powerful Sealed For Grinding Milling Machine Lathe Magnets |
|
|
|
|
| The CNC Superhigh Magnetism Grinder Chuck is mainly used for workpiece processing positioning in various surface grinders and tool grinders and is a chuck which can achieve machining positioning. | |
|
|
|
 |
|
| Product Parameters: | |
| Size of Chuck: 16''X16''X3'' (40cmX40cmX8cm) | |
| Gross Weight: about 201lb (91kg) | |
| Product Features: | |
| 1. The magnetic poles are combined into square arrays, magnetic bundles are perpendicular to each other and are interwoven, and the magnetic chuck can attract sheets to conduct milling operation. | |
| 2. The magnetism is generated by high-performance materials, the time limit does not exist, no power consumption is generated, heat is not generated, and the magnetic chuck is environmentally friendly and safe. | |
| 3. The simple mechanical opening and closing mode is adopted, the power supply is not required, and the workpiece falling risk caused by sudden power losing and magnetism disappearing is avoided. | |
| 4. High-magnetism clamping operation is achieved, the clamping requirements of the machining center for workpieces is fully met, and the clamping efficiency is remarkably improved. | |
| 5. The magnetism is constant and uniform, the clamping operation can be more stable and safer, and the operation safety is better guaranteed. | |
| 6. The workpieces can be easily and rapidly replaced, multi-side machining is achieved, and the auxiliary machining time can be shortened. | |
 |
Magnetic bundles are perpendicular to each other and are interwoven, magnetic poles are combined into square arrays, the magnetic chuck can attract sheets to conduct milling operation, the operation is easy, safe and efficient, and the efficiency of the machining center is greatly improved. |
| The safe clamping operation can be easily achieved through the simple mechanical opening and closing operation, no power source is required, and the phenomena that due to the power source is suddenly disconnected, the magnetic force disappears, and the workpiece falling risk exists are avoided. |
 |
|
|
The magnetism is uniform and constant and is generated by high-performance materials, the clamping operation can be safer and more efficient, the time limit and the energy consumption do not exist, and the chuck does not generate heat, and is environmentally friendly. |
| The superhigh magnetism grinder chuck is rectangular, epoxy resin is poured into grooves between magnetizers to achieve sealing, matrix rare earth magnetic steel is distributed in the chuck, the rigidity is high, and the precision is table. |
 |
| Operation Steps: | |
| 1. The workpiece is put on the chuck workbench, then the lever is inserted into the shaft hole to rotate by 180 degrees clockwise, and the workpiece can be attracted to be processed. | |
| 2. After the workpiece machining is finished, the lever can be inserted into the shaft hole to rotate by 180 degrees anticlockwise, and the workpiece can be taken away. | |
| Tips: | |
| 1. The surface of the chuck should be wiped before the chuck is used, so that scratches are avoided. After the chuck is used, the surface should be coated with oil to prevent corrosion. | |
| 2. The use environmental temperature is -40 DEG C to 50 DEG C. | |
| 3. Do not knock, to prevent magnetism reduction. | |
|
|
|
|
|
|
| Item Number 1 X CNC Superhigh Magnetism Grinder Chuck 16''X16''#1T701O17 |
|
