USB3.1/3.0 To ESATA (6Gb) Adapter,JMicron Chipset Port Multiplier, eS3U31

Slide Slide Slide
$12.95
Brand
DatOptic
Type
USB adapter
USB Specification
USB 3.0 / USB 3.1
Connection Split/Duplication
1 : 3
Connector B
eSATA Female
Compatible Model
JMicron
Connector A
eSATA Female
MPN
eS3U31
condition
New

USB3.1/3.0 To ESATA (6Gb) Adapter JMicron Chipset Port Multiplier, eS3U31 

eS3U31 - the latest USB adapter provides the simplest and fastest way for anyone who wants to use external SATA (eSATA) enclosures with the new USB 3.1 host (USB 3.0 compatible). Whether it is a single drive or multiple devices with built-in port multiplier, such as: JMB393, JMB394. JMB575 chip set (patent pending). The eS3U31 is must have device for your new new computer either Mac, Windows or Linux!

  • Supports eSATA drive with or without port-multiplier up tp 6Gb (SATA III)
  • Supports Hot-Swap & Plug-n-Play Windows ME, and later, Mac OS X, and Linux Kernel 2.6+, Solaris 10
  • Supports Software RAID feature in Mac OS X, and Linux
  • Support s SATA Port-Multiplier: JBod or Hardware RAID
  • Supports SATA III Asynchronous Signal Recovery (Hot Plug) feature (6Gb)
  • Complies with USB 3.1, USB3.0 and USB2.0 Specification, USB Mass Storage Class, Bulk-Only Transport Specification
  • Supports USB 3.1 Super-Speed/High-Speed/Full-Speed Operation
  • No power, no driver required
  • Designed in the USA

 

This USB3.1 to eSATA adapter allows you to connect ANY eSATA device with or without Port Multiplier (up to 6Gb SATAIII) to a superspeed USB3.1 device! It provides a bandwidth of 10Gb/s, driver-less technology, and fully supports software RAID feature in Linux and Mac OS X.

Our New Adapter function same as the predecessor U3eSATA adapter but Faster and support latest SATA III


Supports Port multiplier 
This means with our USB 3.1 adapter, your system can see up to as many drives as you want! Imagine creating a massive 500TB (10TB x 50 drives) volume with a ten (10) port hub and a ten PM (port multiplier) adapters/bridges. Since USB 3.1 or USB 3.0 hub can be cascaded, the question then is how many drives do you want to connect?!?


eSATA (6Gb) to USB 3.1 connectivity 
USB3.1 to eSATA 6Gb adapter is the easiest solution for connecting any of the latest eSATA - support SATA I, II and III - devices to the ubiquitous USB3.1 port. Fully support most notebooks and desktops and its compact design is easy to carry and easy to use.


Easy of Use 
Does not require drivers or power. It is truly a plug and play device, it takes seconds!

*Does NOT support Sans Digital enclosures.

Part Number eS3U31 
USB 3.1 to eSATA (6Gb SATAIII) adapter (patent pending)
Peripherals Any eSATA enclosure with or without PM technology
Operating System ANY OS support USB 3.1, 3.0 and 2.0 
Linux: Required kernel 3.13xxxx or later
Host Interface USB3.0 
Supports USB Super-Speed 10Gb/ 5Gb/s; High-Speed 480Mb/s; Full-Speed 12Mb/s Operation
Device Interface eSATA device support PM ware SATA II and SATA III 
Support JMB393, JMB394, JMB321, JMB575
Operating Temperature 0o C to 50o C
Operating Humidity 5% to 95% non-condensing
Dimensions .5 x 1.25 x 2.5-inches (H x W x D, approximate)
Power Requirement No external power required
Package Contents eS3U31 Adapter - No power required