Ultrasonic Flaw Detector NDT Ultrasonic Testing Flaw Detector Range 10mm-2000mm
Introduction:
- We pursue the degree of portability in the field of industrial flaw detection, simplify the complex, the team work hard day and night to develop a new flaw detector, make the flaw detection more simple, convenient, to meet the increasingly updated needs of modern flaw detection.
Function:
- Small size
- High level integration
- NDT material internal defects
- Plug and play, compatible Xp、Win7、win10
- Easy and flexible calibration
- Square wave pulse excitation, optimized electro-acoustic matching, more suitable for ultra-thick/ultra-thin workpiece detection
- Support full wave, positive wave, negative wave and radio frequency signal
- Support 80M-160M different sampling frequency
- Support single crystal, double crystal, transmission mode detection
- Support 1M-15M probes of different frequencies
- Battery：Work continuously for 5 hours
- Highlight color screen, read under strong light, adjust screen brightness arbitrarily
Operation:
- Visual operation, simple operation
- Text menu structure, quick and clear setting
- Support a variety of standard probes
- Products are widely used in pressure vessels, petrochemicals, aerospace, welding, railways, metallurgy, steel structures, electric power, boilers, nuclear industry, shipbuilding, aircraft manufacturing and automobile production.
Performance:
- Principle: Ultrasonic (Pulse-Echo/E-E)
- Detection range: 10mm – 2000mm
- Velocity: 100-9999m/s，Preset 26 common material sound velocities
- Probe delay: 0-500us
- Display delay: -199-200mm
- Dynamic range: >36dB
- Sensitivity: >64dB 200mm，2mm flat bottomed hole
- Dimension(mm): 107×35×14mm
- Weight: 0.05Kg
- Working Environment: Temperature -10-60℃;Humidity 5%-60%
- Drive system
- Square wave pulse: 50-230V
- Pulse width: 50–1500ns
- Repeat frequency: 100-5000Hz Continuous adjustable
- Matched damp: 50Ω
- Receive system
- Gain: 0-80dB dynamic range
- Gain interval: 0.1/0.2/0.5/1/2/6/12
- Sampling frequency: 80-160M
- Testing method: Peak/edge
- Testing method: Full wave/positive wave/negative wave/RF
- Bandwidth frequency: 1.25/2.5/5/10/Wide frequency
- Mean value: 1-100
Storage:
- A scan raw data
- B scan imaging
- USB storage: Save data via USB connected to U disk
- Input-Output
- Probe connect: C5
- Connect: USB
- Regional
- Language: Chinese/English
- Unit: mm/inch
- Clock: Real time display date/time
Gate:
- Quantity: 3 independent gates (1 interface gate）
- Follow the gate: Support gate 1 frame selection of boundary waves, gates 2 and 3 are always in the same position after boundary waves as follow-ups
- Measured value display: The maximum peak amplitude, position (SA), depth (DA), horizontal distance (PA, RA (remove the leading edge of the probe)) and the number of round trips in each gate.
- Alarm: Alarm logic is set in each gate (positive(wave is higher than the gate)/negative(waveform is lower than gate)/close)
Quick operation:
- Full screen/lock screen/auto gain/freeze/envelope/device re-connection
- Equivalent curve:
- DAC/TCG:5 curves
- Standard:GB 11345、NB 47013
- Standardize:10 non-sequential calibration points
- DGS:Suitable for three reference types of large flat bottom/flat bottom hole/through hole, considering the reference attenuation, material attenuation and surface compensation factors, defect evaluation method: equivalent size/equivalent gain/percentage
Cloud:
- Remote Assistance:Wechat/Whatsapp
- Date:Upload/download/analyze data
- Update:Cloud upgrade/authorization
Configuration:
- Host----------1
- Straight/Angle Probe----------2
- Probe line----------2
- Manual----------1
- Tool box----------1