CLASSIC PIN STRIPS
Selection Of Coach Pinstripes Go Faster Tape
Choose from the drop-down menue
9.5 Metres Long 9mm Wide
Thin Strip Approx 2mm and Thick Strip 5mm approx
Pin stripes, originally for vehicle use, can now be used for multiple applications
High Grade Self Adhesive Permanent Stick Vinyl
Long lasting application
Plotted stripe on coloured vinyl
Easy to apply
Application:
- Make sure the surface is smooth and clean, apply only in recommended temperatures of between 15 degrees to 30 degrees.- Remove a small section of the backing paper and press down the end of the strip.- Remove the backing paper a small section at a time, press down the stripe with your fingers. If curves or turns are required, with care, curve the tape with one hand, pressing it to the ...
CLASSIC PIN STRIPS
Selection Of Coach Pinstripes Go Faster Tape
Choose from the drop-down menue
9.5 Metres Long 9mm Wide
Thin Strip Approx 2mm and Thick Strip 5mm approx
Pin stripes, originally for vehicle use, can now be used for multiple applications
High Grade Self Adhesive Permanent Stick Vinyl
Long lasting application
Plotted stripe on coloured vinyl
Easy to apply
Application:
- Make sure the surface is smooth and clean, apply only in recommended temperatures of between 15 degrees to 30 degrees.
- Remove a small section of the backing paper and press down the end of the strip.
- Remove the backing paper a small section at a time, press down the stripe with your fingers. If curves or turns are required, with care, curve the tape with one hand, pressing it to the surface with the other.
- Make sure tape has adhered to the surface, on double and triple stripes only, after all the stripe has been fitted, remove the clear top tape by pulling it away at an angle of 180 degrees
- Cut the stripe at edges of doors, pressing down all loose edges.
- Make sure the surface is smooth and clean, apply only in recommended temperatures of between 15 degrees to 30 degrees.
- Remove a small section of the backing paper and press down the end of the strip.
- Remove the backing paper a small section at a time, press down the stripe with your fingers. If curves or turns are required, with care, curve the tape with one hand, pressing it to the surface with the other.
- Make sure tape has adhered to the surface, on double and triple stripes only, after all the stripe has been fitted, remove the clear top tape by pulling it away at an angle of 180 degrees
- Cut the stripe at edges of doors, pressing down all loose edges.
If you heat the tape with a hot air gun, this is one of the few tapes on the market that will shape round bends and curves.
FAST FREE UK DISPATCH
