Description
A long time without changing the oil in your car's transmission will cause your car to have a stuttering feeling and a hard start. In serious cases, the transmission will be burned out. Our product can provide you with the solutions to these problems. This high-quality fluid extractor with professional change accessories can help you change the transmission oil easily and fast.
Package Included
1* 10L Liter Reservoir
1* PU Hose with One Touch Controller Gun for Dispensing
3* PU Tubes
13* Transmission Adapters
Other Needed Accessories
Application for 13PCS ATF Adapters
ATF101 (1/8"-27) Compatible with Ford
ATF102 Compatible with universal BMW, Nissan, Honda, etc
ATF103 Compatible with Audi, VW, Skoda
ATF104 Compatible with Porsche, VW, Audi
ATF105 (M10 x 1) Compatible with VW, Mini Cooper, Audi
ATF106 (M24 x 1.5) Compatible with Audi, VW DSG
ATF107 (M22 x 1.5) Compatible with Audi, VW CVT
ATF108 (M18 x 1.5) Compatible with Skoda, VW
ATF109 (M12 x 1.5) Compatible with ALTIS 2010 BENZ 722.9
ATF110 (M30 x 1.5) Compatible with Skoda, Audi, VW
ATF111 (Universal Flexible 300mm) Compatible with Honda, Kia, Hyundai, etc
ATF112 (M8 x 1) Compatible with Nissan, Infiniti
ATF113 (M18 x 1.5) Compatible with Toyota, Lexus
Key Features
Large Capacity: It has a 10L/10.6Qt capacity pneumatic air suction pump, which can fill most car models' transmission oil in one operation to avoid wasting time on secondary operations, making it an ideal tool for oil replacement.
Two-way Control: The fluid extractor pump is designed with a two-way control system(air inlet switch valve, and screw valve) The two control valves allow you to achieve the conversion between extracting and dispensing.
ATF Refill System: Comes with 13 ATF adapters that are packed in a storage case, the fluid extractor is suitable for most auto transmission of new vehicles for refilling fluid, such as VW Audi Mini Cooper, FORD, VOLVO.
Easy Operation: Works with an air compressor, the pump can extract and dispense fluid in minutes. There is a one-touch coupler, which allows you to disconnect the pipe with one simple press, making the operation easy.
Safety Design: There is a safety valve for pressure release, and you need to preset 43 PSI when dispensing, then the excessive pressure will be released automatically. Moreover, you can read and control the pressure inside the tank by watching the pressure gauge. Both decide the safety of your operation.
High Quality: Our transmission fluid extractor is made of PU materials, and it is durable enough to withstand high pressure and corrosion from various liquids and wear resistance.
Innovative Design: The oil extractor can be inserted into the engine dipstick tube to extract and refill engine oil or transmission fluid directly. You don't have to crawl underneath the lifted vehicle to avoid confusion.
Customer Service: We aim to provide quality products and services. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.
Notes
- Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
- Please wear correct personal protective accouterments when operating, such as glasses, gloves, mask, and hard helmet (not included) .
- Please ensure that the compressor is set at the correct air pressure.
- Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
