3.5k trailer axle with 62" hub face and 48" spring center 5x5 bolt pattern.
Great for a 4' wide trailer frame
this axle comes fully assembled with spring pads welded on axle and hubs installed, pregreased and ready to go!
AXLE SPECIFICATIONS:
Brand: Rockwell American
hub face to hub face: 62"
spring center to spring center: 48"
bolt pattern: 5x5"
works great with a 50" trailer frame
Country Made: The U.S.A.
Capacity Per Axle (LBS): 3,500
Stud Size: 1/2"
Hubs/drums: 5 Lug hubs
Spindles: #84
Spindle Size: 1-1/16"
Axle Tubing Diameter (Inch): 2 3/8"
Axle Tubing Thickness: .180"
Lubrication: EZ-Grease Zerks in Spindles
Spring Pads: Welded on Axle
Brake: no brakes
Hubs: 5 lug idler hubs installed on axles.
Brake Flange: 4 Bolt Welded on Axle
Pre-Greased: Yes
Bearings:
Inner Bearing - L68149
Outer Bearing: L44649
Seal: 10-19 EZ-Lube:
1.719" Inner Diameter.
2.565" Outer diameter.
Races
Inner Race: L68111
OUTER RACE: L44610
Grease Cap:
1.98' Outer Diameter - EZ-Lube with Rubber Plug
Spindle: EZ Lube
how to measure your axle:
Hub face (hf):
refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle
(when hubs are mounted on the beam).
Spring center (sc):
is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other.
This axle beam comes with the spring seats welded on.
BOLT PATTERN
Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:
If the distance is:
2-5/8" - the bolt pattern is 5 on 4-1/2
2-3/4" - the bolt pattern is 5 on 4-3/4
3" - the bolt pattern is 5 on 5
3-1/4" - the bolt pattern is 5 on 5-1/2
FAST SHIPPING OR PICK UP FROM OUR DISTRIBUTION CENTER IN HUNTSVILLE TEXAS
TRAILER PARTS UNLIMITED
631 TX 75 N
HUNTSVILLE TX 77320
check out our website for more deals
trailerpartsunlimited com