Tonebender MKIII PNP Ge. Transistor Set/Req.Specs/NOS/Mixed Manufacturers

Slide Slide Slide Slide Slide Slide
$15.0
Number of Elements per Chip
1
Mounting Style
PCB Mount
Minimum Operating Temperature
-65 °C (-85 °F)
Number of Pins
3
Maximum Operating Temperature
100 °C (212 °F)
Type
PNP
Transistor Category
Small Signal Transistor
Configuration
Single
Brand
Mixed Manufacturers
condition
New – Open box
Up for consideration is a set of 3pcs. of transistors specifically matched up for Tonebender MKIII circuits. There are many different sets of 3 pcs each. Each set has been hand picked to meet the requirements of the circuit. These sets consist of mixed manufacturers and mixed type numbers to achieve the required results.

All transistors have been fully tested for functionality and both Hfe and leakage value.

***PLEASE!!!! Choose which set you want to purchase.  If no set is chosen,  the next available number in the set will be sent. (This is due to some customers not answering messages or not requesting a set at purchase).

These particular transistor's measurements fall into the proper range for the MKIII circuit.
The particular set's parameters are:
Set #1  Sold 

Set #2   Q1- W.E. 12-H Hfe = 59, Iceo = 202uA
              Q2- W.E. 12-H  Hfe = 59, Iceo = 212uA 
              Q3-Sescosem 2N397  Hfe = 107, Iceo = 25uA 

Set #3  Sold 

Set #4  Q1-Sescosem 2N397 Hfe =73, Iceo = 44uA
              Q2- T.I GA2825  Hfe = 75, Iceo = 35uA
              Q3- Gen.Inst  GI-4 Hfe =145, Iceo = 88uA 

Set 5  Q1- Gen.Inst  GI-12 Hfe =74, Iceo  =42uA 
            Q2- T.I 2N1305 Hfe = 75, Iceo = 108uA 
            Q3- T.I 2N1404 Hfe = 155, Iceo = 35uA

Set #6.  Q1-W.E. 12-H   Hfe =58, Iceo = 98uA 
              Q2-W.E.  12-H   Hfe =58, Iceo =118uA 
              Q3-Sescosem 2N397  Hfe = 108, Iceo = 50uA 

Set 7 sold 

Set #8   Q1--MP21b, Hfe = 61, Iceo = 125uA 
               Q2--MP21b, Hfe = 62, Iceo = 190uA 
               Q3--Gen. Inst 2N404 Hfe = 113, Iceo = 56uA

Set #9    Sold 

Set #10-sold 

###Please, again,  when purchasing, leave a note as to which set you would like. 

The transistors are tagged for proper identification. In the case of sets that have the same part numbers,  then the transistors will be marked with a 1,2,or 3 to distinguish between them or may be marked with their hfe and leakage value. This marking removes easily with isopropyl alcohol. Also, the photos of the sets and the description of the set's parameters will be removed as they are sold. 

We will be listing more of these types of set's, with different brands and types of transistors for particular pedals including, a Tonebender MKIII, a standard FF, a Joe Bonamassa style set, and others. We have to test a large amount of transistors to get to the proper specifications for these circuits. 

All of our transistors that have been tested are recorded and stocked, if you have a specific request for certain parameters, please feel free to message us and we will do our best to accommodate your request.
Thank you.