Tilt-A-Rack Aluminum Scooter and Wheelchair Full Size Carrier - 500 lb. Capacity

Slide Slide Slide Slide Slide Slide
$628.99
Brand
Tilt-A-Rack
Type
Wheelchair Carrier
Manufacturer Warranty
1 Year
Item Height
4 in
Color
Silver
Maximum Load Capacity
500 lb
MPN
500ARV
Material
Aluminum
Item Length
60 in
Item Width
32 in
Item Weight
103 lbs
California Prop 65 Warning
WARNING: This product can expose you to chemicals, including Chromium, Lead and Toluene, known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
condition
New
The innovative Tilt-a-Rack series of scooter and power chair carriers, exclusively available from DiscountRamps.com, features patented tilting carrier technology with an integrated slide-out ramp system. To use the carrier simply pull the tilt handle, slide out the ramp from under the platform, tilt towards the ground and you are ready for loading. The entire carrier shifts back to its original upright position using the weight of the scooter while it is being loaded. This is by far the easiest and safest loading system available on the market - no ramps to fold, unfold or stow away separately. This full size carrier is specifically designed to carry most full size scooter and chairs - platform measures 60" long by 32" wide and comes with an extra-long 52-1/2" ramp. This carrier will accommodate scooters which weigh up to 500 lbs.

This Tilt-a-Rack scooter carrier is made from high-strength aluminum which will never rust and weighs only 103 lbs. Installation is a breeze and requires no hook-up to your vehicle's electrical system. When not in use this carrier conveniently folds up against the back of your vehicle to make driving and parking easy and safe. This carrier comes with a hitch pinch bolt to stabilize the carrier while transporting your mobility aid. US Patent number 7,841,821.

  • Manufactured from high-strength, lightweight aluminum
  • 500 lb. weight capacity
  • Rack tilts and integrated ramp slides out for easy loading and unloading
  • Designed for Class III or IV 2" hitch receivers
  • Platform measures 60" L x 32" W, loading ramp measures 52-1/2" L
  • Folds flat against your vehicle when not in use
  • Anti-rattle pinch bolt included
Usage Guidelines
Please note, hitch-mounted mobility carriers are not recommended for use on tow-behind trailers including 5th wheel and camping trailers, motor-homes or RVs. Never exceed the lowest maximum rating of either of these two: vehicle’s tongue weight and vehicle’s trailer hitch tongue weight. Be aware that your hauling weight may be limited by your vehicle's suspension. Some vehicles may require air shocks or heavier springs to stiffen up the suspension and prevent sagging. Carriers are not recommended for hitches less than 12" from the ground to the bottom of the hitch without the use of a riser adapter.

Length:
60"
Width:
32"
Height:
4"
Ramp Length:
52-1/2"
Ramp Width:
32"
Hitch Class:
III or IV
Hitch Size:
2
Minimum Hitch Height:
13"
Maximum Hitch Height:
16"
Maximum Capacity:
500 lbs.
Weight:
103 lbs.
Material:
Aluminum