To use the fireplace remote on/off control system kit, simply connect the two terminals to the TH and TH/TP terminals of the millivolt valve
Remote allows you to turn your gas logs on/off or set the temperature you want
Includes remote, receiver, wall plate, and wiring to connect receiver to valve
DIP switches on the transmitter and the receiver must have the same position on both in order for the system to work , if not matched the transmitter will not work, check the photos to find the place of the dip switches on both.
Replacement for SKYTECH - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves
Reset button can be used to reset the transmitter if transmitter is not working properly. The reset button is located behind the battery door cover. Using a paper clip, press the reset button and the transmitter will reset and initialize for 10 seconds before it can be used.
Testing the kit : make sure the receiver is on the RS mode ,press ON or OFF button from the transmitter, the receiver should indicate a red flashing light , that means transmitter is connected with receiver, if not make sure that the dip switches are in the same position and matched on both transmitter and the receiver.

Thermostat Remote Control with Receiver Kit for Millivolt Gas Fireplace .

This wireless thermostatic on/off/ remote control system provides a safe, reliable, and user-friendly remote control

for millivolt valve gas appliances. The system can be thermostatically or manually turned on and off with the

transmitter. Always check the appliance home owner’s manual for additional information, or warnings regarding

accessory installation before connecting this remote control system.

FEATURES/SPECIFICATIONS

✅ Easy Access Thermostatic Control

✅ Battery Powered Transmitter and Receiver

✅ Low battery Indication

✅ Child Proof Lock-out

✅ 16 Security Codes

✅ 6 hour Shut Down (Optional)

✅ Quick Disconnect Wiring Assembly

✅ Reset Button

Important Safety Information

🔆Read this manual thoroughly prior to installing, programming or operating any remote control.

🔆This remote control system is designed for use with a millivolt or 24V gas valve system.

🔆 Do not use this remote control system on applications with voltages above 24 Volts AC/DC and 1 amp

🔆This remote control system requires three (3) “AAA” and four (4) “AA” batteries to power the

transmitter and receiver.(batteries not included)

🔆Wiring must conform to appliance requirement and building codes/ordinances as required by local and
national code authorities having jurisdiction.

🔆 Do not short (or jumper) across the gas valve terminals to test the remote control installation. This could

damage the unit and void the warranty.

🔆This remote control system should only be used as described in this manual. Any other use is prohibited

and will void the warranty

Attention: This does not work with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase.