|
The pneumatic press is the high-pressure gas produced by the
compressor, which is transported to the
solenoid valve through the gas pipe.
The working state of the cylinder is controlled by the movement of the
solenoid valve through the switch, and the punching is
completed.
1 .Compressed air as power source, high efficiency and easy
operation, can reduce labor, can be applied to manual
operation integration,
automated assembly line .
2 .Simple structure, convenient operation, cheap
price, superior performance, no noise produced during the hydraulic
system
and electric standby, can save electricity consumption reduce production cost,
has the very high cost
performance .
3. Easy adjustment of output, need
to adjust the air pressure is adjustable up to the required pressure, high
yield.
4.Equipped with guide plate, high accuracy, can adapt to high speed
precision impact load .
5.According to different products or mould, adjust
the speed, and the size of the pressure and stamping time .
6.Optional manual
switch control, with emergency stop switch, can also be controlled by a
controller.
7.Microcomputer control system, can choose manual, semi-
automatic and fully automatic operation. |
| Range of application:
Suitable for electronics, electrical appliances,
instruments, meters, cameras, watches, jewelry, hardware and
garment, shoes
and hats. |
 |
 |
 |
Air source
processor, through the
pressure gauge at any time to
observe the change
of air source
pressure, effective separation of
water, oil and other
impurities in the
air, air purification, improve the
service life of the
machine. |
High quality cylinder
SCJ6.3*3.9-
1.97inch/160*100-50mm, quick action,
quick response, travel
can be adjusted
within the effective range. |
Equipped with a controller, easy to switch
between manual operation and automatic
operation .(single cylinder
machine, just set
1, 2, 3 section number. 1 is the pressing
time
setting; 2 is the second time to
increase the setting; 3 is the return time
setting) | |
 |
 |
 |
Two-handed
switch, two-handed
operation, safer. Equipped with
emergency stop
switch, one key
stop, more efficient. |
A clamp with an inner diameter of 0.98 ",
equipped with a guide plate, is more
precise and stable. |
Widened and enlarged work surface with
1.9 "diameter blanking hole, 4 T-slots for
easy securing of
items. | |
