Technics SL-1300G-S Silver Direct Drive Turntable
From Japan
Description
The 4th generation direct drive turntable system has evolved with a new coreless direct drive motor and further refined ΔΣ-Drive.
The new generation motor drive technology ΔΣ (Delta Sigma)-Drive reduces minute rotational irregularities and vibrations that cannot be measured by wow and flutter or S/N, and achieves high rotational accuracy in combination with the newly developed twin rotor coreless direct drive motor.
The SL-1300G has refined sound quality by strengthening the rigidity of the two-layer chassis, adopting a three-layer platter with special balance adjustment, and bringing together Technics' unique low-noise power supply technology.
This is a new generation direct drive turntable system for those who are particular about playing analog records.
■ Main features
〇 New twin rotor coreless direct drive motor with revised motor design to eliminate the impact of micro-vibrations on sound quality
〇 Further refinement of the motor drive technology "ΔΣ-Drive" to reduce rotational irregularities and micro-vibrations
〇 Three-layer platter with high vibration damping properties
〇 High-rigidity two-layer chassis made of aluminum die-cast and BMC
〇 Insulators tuned for optimal balance with the chassis and sound quality
〇 Static balance S-shaped tone arm, a tradition of Technics turntables
〇 High initial sensitivity achieved through assembly and adjustment by skilled craftsmen
〇 Auxiliary weights compatible with a wide range of cartridges are included
〇 Uses carefully selected parts, such as PHONO terminals with gold-plated terminals
〇 Adopts a simple and modern design while maintaining the traditional Technics layout for simple and comfortable operation. Available in two colors: silver and black
〇 Uses environmentally friendly cushioning materials to reduce the amount of plastic used to reduce environmental impact.
■ Specifications
General
○ Power supply AC100 V, 50/60 Hz
○ Power consumption
・ 10 W (power on)
・ 0.2 W (power off)
○ External dimensions (width x height x depth) 453 mm x 173 mm x 372 mm
○ Weight Approximately 13.0 kg
○ Allowable operating temperature 0 ℃ to 40 ℃
○ Allowable relative humidity 35 % to 80 % RH (no condensation)
○ Color -S (silver), -K (black)
○ Output terminals PHONO terminal x 1, PHONO earth terminal x 1
Turntable section
○ Type Direct drive turntable system (manual)
○ Drive method Direct drive
○ Drive motor Brushless DC motor
○ Turntable
・ Aluminum die-cast and brass integrated type
・ Diameter: 332 mm Weight: Approximately 3.6 kg (including rubber sheet)
○ Rotation speed 33 ⅓, 45, 78* rpm
○ Starting torque 0.32 N・m (3.3 kgf・cm)
○ Starting characteristic 0.7 s (at 33 ⅓ rpm)
○ Brake mechanism Electronic brake
○ Wow and flutter 0.025% W.R.M.S.
Tone arm section
○ Type
Universal S-shaped tone arm, static balance type
○ Effective arm length 230 mm
○ Overhang 15 mm
○ Tracking error angle
・ +2° 32′ (30 cm (12 inch) record outer circumference)
・ +0° 32′ (30 cm (12 inch) record inner circumference)
○ Offset angle 22°
○ Arm height adjustment range 0 to 6 mm
○ Stylus pressure adjustment range 0 to 4 g (stylus pressure direct reading type)
○ Shell weight Approx. 7.6 g
○ Applicable cartridge weight
・(Without auxiliary weight) 5.6-12.0 g / 14.3-20.7 g (including headshell)
・ (When using small auxiliary weight) 10.0-16.4 g / 18.7-25.1 g (including headshell)
・ (When using large auxiliary weight) 14.3-19.8 g / 23.0-28.5 g (including headshell)
○ Cartridge mounting dimensions JIS standard 12.7 mm (½ inch) mounting interval
○ Shell terminal lug 1.2 mmφ 4-pin terminal lug
○ Accessories
・ Turntable x 1
・ Turntable sheet x 1
・ Dust cover x 1
・ EP record adapter x 1
・ Balance weight x 1
・ Small and large auxiliary weights (1 each)
・ Shell x 1
・ Overhang gauge x 1
・ Cartridge mounting screws (1 set)
・ Turntable mounting screws (1 set)
・PHONO cable x 1
- PHONO earth wire x 1
- Power cord x 1
*If the rotation speed is set to 78 rpm, it is set to rotate at 78.26 rpm.
*Cartridge not included.