









A3PRO FAST RC CAR BATTERY CHARGER NiMH LiPO TAMIYA + MINI TAMIYA Plug 6v 7.2v
TE3025 A3PRO RC CAR BATTERY BALANCE CHARGER B - Nimh / LiPO / LiFE
INTRODUCTION:
Thank you for your choice of the TE3025, 100-240V AC balance charger. This unit is simple to use but its operation does require some knowledge on the part
of the user. -Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating
and safety.
TE3025 Charger is an economic, high-quality 100-240V AC balance charger, designed for charging, LiPo, and LiFe batteries from 2/3 cells in balance mode.
NiMH batteries from 1s-8s cells in the 3s cells balance socket. The circuit power is 25W and the max charge current can reach 3A. TE3025 charger can check
batteries capacity and charging with 1C current
CHARGE PROCEDURES:
TE3025 comes with a built-in power supply. You can connect the AC power cord to the AC
socket(100-240V AC) directly
Note: This charger can charge LiPo/ LiFe and NiMH batteries in balance mode ONLY. In this case you must use a balance board to connect the charger with the
battery
Please refer to the following steps to charge the battery,
1)Insert the AC power cord into the charger.
2)Insert the AC cord into a wall socket(100-240V). All LEDs will be lighted
3)Select the battery type LiPo/LiFe/NiMH
4)Connect the LiPo/LiFe/NIMH battery's balance wire to the chargers balance socket and select the corresponding button to start charging
5)The charger starts charging The charge status LED uses the wire to connect 3 cells balance socket will flash.
6)When the battery is fully charged, the charge status LED will glow constant green/orange/red.
EXPLANATION OF LED STATUS:
Charging
Lipo: Green LED flash
Life: Orange LED flash
NINH: Red LED flash
Full
Lipo: Green LED constant
Life: Orange LED constant
NINH: Red LED constant
SPECIFICATION:
AC Input: 100-240V
Battery Type: LiPo/LiFe/NiMH
LiPo/LiFe: 2S/3s Lipo/Life Battery
NiMH: 1-8s (1.2v, 2.4v,3.6v, 4.8v, 6.0v, 7.2v, 8.4v, 9.6v) NiMH batteries
Charge Current: 3A max
Circuit Power: 25W
Current Drain for Balancing: 200mA
Dimension: 92×67X35mm
Weight: 105g
Standard Tamiya connector + Mini Tamiya connector cable included
Package Include: 1x TE3025 A3PRO RC CAR BATTERY BALANCE CHARGER
- All payments must be prepaid.
- Accept payment by Credit Card 、Debit Card、Apple Pay、Google Pay and PayPal.
- Payment must be received within 7 days after auctions ended. Unpaid dispute will be filed to eBay for the non payable bidders.
- We will ship all orders within 2 business day of payment.
- The shipment usually takes 1-5 business days (Saturday and Sunday excluded).
- If you need the item urgently, please contact us for detail before purchase.
- Local pick up is not available.
1.Our items come with our warranty.
2.Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3.This product comes with 60-Day Money Back Guarantee.
4.We stand behind every product we sell. If you're not pleased with your purchase, we'll be happy to make an exchange or refund.
5.For all returned products, please contact us for the returning address.
Welcome to our store ! We supply many products including unmanned drone and accessories, camera & camcorder accessories and Consumer Electronics.High product quality, reasonable prices, excellent customer service and a reliable credit standing is our tenet.
Thank you for shopping at our eBay Store.
2. Your better comments will be an encouragement for us to offer the better quality and the better service in future.
3.If you are not satisfied with them, please contact us first via Ask a Question or via Contact Seller. Your messages will be answered within 1-2 business day. We shall try our best to solve your problem to your satisfaction.

