"TANK CURE"
products enable you to recondition the inside of your fueltank in a
professional way. "TANK CURE" is manufactured by POLY-SERVICE. This
petrol resistant Tank Sealant is adopted on a large scale in The Netherlands,
Germany, England and Belgium. Users have build up more then 15 years of very
satisfying experience with this sealant. It has been successfully applied to
steel tanks.
What can you achieve
with Tank Cure?
Cure rusted tanks
Stop leakage through
seams and pinholes
Preventive treatment
against leaking seams, pinholes and the build up of rust
Shield off pollution
in oil tanks (after sandblasting)
Treatment of the tank
before application of Tank Sealant
In order to guarantee
a good result you always have to do some preparation on your tank. Before you
apply the sealant the tank should be absolutely dry, free of grease and almost
free of rust. "TANK CURE" offers you products that will assist you in
the preparation of the tank.
"TANK CURE"
Tank Cleaner
"TANK CURE"
Rust Remover
These products form
an ideal base before you apply the tank sealant.
A brief highlight
each product:
"TANK CURE"
Tank Cleaner
This is a strong
cleaning fluid to degrease your tank. Tank Cure advise to always use this
product because it will guarantee a good adhesion of the sealant to the surface
of the petrol tank. Especially if you apply the sealant in a tank for a two
stroke engine it is necessary to use the tank cleaner first.
"TANK CURE"
Rust Remover
Tanks with a rusted interior
can be treated very successfully with this product. Tank Cure advise
to use the Rust Remover if the inside of your tank is severely rusted.
For a motorcycle tank
you will need 1/2 a litre of Tank Cleaner and 1/2 a litre of Rust Remover.
Application of the
tank sealant
In order to guarantee
a good result you always have to do some preparation on your tank Before you
apply the sealant the tank should be absolutely dry, free of grease and almost
free of rust. It is strongly recommended to use TANK CURE Cleaner and TANK CURE
Rust Remover according to the user guidelines to guarantee a good result. These
products are extensively tested in combination with the Tank Sealant.
"TANK CURE"
tank sealant is based on a 2 component epoxy resin. After adding the two
components together stir them thoroughly for a couple of minutes, empty the can
in your petrol tank and seal the filler opening properly. Now slowly turn the
tank in all directions. Keep turning for about 15 to 20 minutes. The sealant
should touch all surfaces several times to form a good layer. Now open the
filler cap and put the tank upside down to drain as much sealant as possible.
You will find several
products on the market to treat petrol tanks. Whatever product you are going to
use: It is very important to apply sufficient sealant to cover the inside of
your tank completely. Being unable to look inside the tank during the sealing
process you have to stay on the safe side. Experience shows that you will need
approx 450 grams for a 15 to 20 litre petrol tank. "TANK CURE" supplies
two standard packages of sealant. A 450 gram package for motorcycle tanks up to
20 litres and a 600 gram package for car tanks up to 60 litres.