RUST REMOVER:
Removes rust from steel petrol tanks.
Pour into tank and shake tank thoroughly after closing the filler opening.
Keep rust remover inside for several hours at room temperature.
Shake the tank regularly.
Empty out rust remover.
Clean tank thoroughly. ( Tank Cure tank cleaner can be used if required)
Dry tank thoroughly.
Especially before application of tank cure sealant.
FUEL TANK CLEANER:
This is a strong claening fluid to degrease your tank.
We advise to always use this product before using the epoxy resin sealer because it will guarantee a good adhesion of the sealant to the surface of the patrol tank.
This is especially important if you apply the sealant in a tank for a pre mix two stroke engined motorcycle as it is necessary to completely remove all traces of oil.