Description
Crux Motorsports Tail Light Kit for 2014 – 2022 WK2 Jeep
Grand Cherokee
FILM DISPLAYED:
- Gloss
Black outer with Dark Smoke inner
FEATURING:
- Die
cut for perfect fitment each time.
- Air
Release Technology for simple and easy installation! NO MORE
BUBBLES!
- Removable
- Pressure
sensitive adhesive
- Premium
Vinyl Wrap
- Avery
SW900 or 3M 2080 films used for Gloss, Matte, Satin, Gloss Black
Metallic, Brushed Metallic Black, Brushed Titanium, Brushed Aluminum
- 3M
printed for Gloss Black Carbon Fiber
- VViVid
vinyl used for Black Forged Confetti, Black Forged, Black Honeycomb,
Black Stealth Plaid
FITMENT:
- Jeep
Grand Cherokee WK2 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
QUANTITY:
- 8
precut wrap overlays total
WHAT’S IN THE BOX?
- Eight
die cut air release wrap overlay
- Two
Crux Motorsports decals
- Install
instructions
TOOLS REQUIRED:
- Squeegee
- Heat
Gun
- Microfiber
- Rubbing
alcohol
- Estimated
time to install: 45 Minutes
FAQ:
- Do
I need to order two?
No, this product is sold in a set for both sides of the
vehicle. One for the driver’s side and one for the passenger’s side.
- How
long before I can wash my car?
You can wash your vehicle directly after applying. No wait
time is required. We highly recommend hand washing vs. automatic car washes.
Automatic car washes use harsher chemicals that can reduce the longevity of the
product.
- How
warm does it have to be to install?
We recommend an outside temperature of at least 60 degrees
Fahrenheit for easy installation.
- How
long will this last?
Multiple factors can affect the life of vinyl outdoors. You
can expect 4-5 years life expectancy, but they are rated to last up to 10
years. Factors that affect longevity include temperature changes, air quality,
frequent car washes, and the conditions in which the vehicle is parked
(inside/outside).
SHIPPING:
- Most
items are shipped with in 1 – 2 business days VIA USPS First class mail
with a tracking number.
- For
International orders delivery times will range from 5 business days to 15
business days depending on location. Items ship USPS First Class
International mail with a tracking number.
INSTALLATION:
- FOR
WET AND DRY PREP: Clean the surfaces around the application area
with car soap, then dry the area. Wipe down the application area with
rubbing alcohol and a microfiber towel. Allow rubbing alcohol to dry.
Start the product application after these steps are complete.
- FOR
WET AND DRY APPLICATION: Installation should be done in
temperatures of at least 60 degrees Fahrenheit. You will need to apply
using a heat gun on a low setting for any curved portion of the light.
- FOR
NON-AIR RELEASE: Fill a spray bottle with water and one
drop of dish soap. Spray down the light and back of the film (adhesive
side). Align the film onto the light. Spray down the top of the film.
Using one of our installation squeegees, squeegee the water out from the
film. Allow dry times of two days before using any power washer on the
vehicle.
- FOR
AIR RELEASE FILM: Align and apply dry. Using a squeegee or your
fingertips, work the film downwards pushing the air out from behind the
film. Once applied, use a heat gun to apply heat on a low setting and
press down the film again. This helps the film set. If you missed any
areas, you would see air bubbles. To remove bubbles, let the film cool to
room temperature and work the bubbles out of the film.
QUESTIONS:
- Have a
question about this or any of our other items? Send us a message with your
order! We look forward to getting your questions answered within
24-48 hours.
*Check all local laws before purchasing*