2 PCS AR500 Steel Shooting Targets IDPA 12" x 20" X 3/8 Gong
Descriptions
3/8” AR500 steel targets work great for the following calibers 223, 5.56, 5.45×39, 7.62×39 and 308. For velocities over 3000fps MV use at 200 yards minimum. Handguns should be used no closer than 10 yards and rifles 100 yards. All of our 3/8″ targets carry a limited lifetime guarantee from breakage.
Two 5/8″ mounting holes and one square hole to accept 1/2″ carriage bolt. All targets are raw and unfinished.
Specification
- Part Number: tsg-gg1220-2
- Dimension: 12" x 20"
- Mounting Holes: 2 X 5/8" & 1 square hole
- Hardness Range: 477 - 550 BHN
- Surface Hardness (min): 477 BHN
- Core Hardness (min): 450 BHN
- Package Contains: 2 X Target
- Target Thickness: 3/8"
- Target Shape: 2/3 scale IDPA
Precision
We use a CNC laser cutting table for all our AR500 products (see our attached video). Unlike plasma cutting, which cuts slowly and puts a lot of heat into the steel, resulting in a large heat-affected zone (HAZ), chipping, edge damage, and easy shattering, our laser cutting method is superior. Plasma cutting, including submerged plasma cutting, softens the steel's edges, while laser cutting provides cleaner, more precise cuts without excessive heat buildup.
