Patent Pending
If you have an LT80 quad and you are looking for any of the following: - better traction (even when braking) - better flotation - a more cushioned ride over bumps and jumps - more stability in the turns or on hills - or even just better looks then, you should be interested in this kit. (Or you may choose to put the money toward our our LT80 to Honda 300ex dual a-arm front suspension kit instead, that is coming out soon - keep checking our eBay store or email us for availability).
This wheel conversion kit, complete with hardware shown, will allow you to mount wheels and tires from a Suzuki R450, Z400, Z250, Honda 250EX, 250R, 250X, 300EX, 400EX or 450R on your LT80. (wheels with 4 holes on 144mm centers on the front)
We also have a new kit that will allow you to convert to the 4/110mm golf cart wheel bolt pattern on the FRONT & REAR while also adding 1.75" (45mm) to the width on each side. Here is the link to that kit: Suzuki LT80 3/120 to 4/110mm Front or Rear Convert to Golf Cart Wheels & Tires !
It is very common for wheels and tires from these quads to be available on eBay (much more common than the odd 3 bolt pattern wheels that came stock on the LT80). Often owners of these quads upgrade to aftermarket tires and wheels for racing, or sell half-used tires mounted on wheels so they can buy new.
- This kit requires no cutting or welding, and can be installed easily in less than an hour for a typical home mechanic.
The wider tires make the LT80 a full four inches wider, and they work very well with our rear wheel conversion kit that will allow you to use 4x110mm wheels on the rear.
With these new wheels and tires, our LT80's have awesome performance, and the awesome looks they should have come with from the factory!
We also now sell Custom Aluminum Rear Wheel Spacers in our other ebay ads!!! Check them out, they are unlike any other spacers on the market!!! When combined with our rear wheel adapters for the LT80, you can use those aluminum wheel spacers to widen the quad and convert to 110mm bolt pattern.
- Steel plates are precision cut with a LASER for accuracy. Plates are 1/4" thick and add 3/4" of width each side also.
- THIS KIT COMES WITH INDUSTRIAL STRENGTH BLACK POWDER COAT FINISH. Kit components go through a seven stage chemical dip cleaning process, electro-statically dipped in black paint, baked, then powder painted and baked again to a super high-strength gloss-black finish.
- All the mounting hardware shown is included (tires and wheels not included). The hardware uses nylon insert-collar lock nuts to resist vibration and prevent loosening of the assemblies. We've never had to retighten a piece of hardware on any of these kits even after running motocross races for months. The nuts are regular flat nuts, and work best with wheels that do not use tapered nuts. Front fenders may need to be trimmed if tire diameter is too much larger than stock.
The bolt pattern on an LT80 is 3 on 120mm (4.72in) centers front and rear. The bolt pattern on a Z400, Z250, 400ex, 250r, 450r, 300ex, 250x or 250ex is 4 on 110mm (4.33in) centers on the rear and 144mm (5.67in) on the front. Tires and Wheels not included with this kit.
We have separate kits for the front and rear. Each hub will have three plates that bolt onto the hub and provide four new bolts sticking out for the new wheels. The three studs from the hub end up flush with the face of the last plate so there is no interference with the new wheels.
Each kit has two sets of holes to allow you to convert to either of the two most popular bolt patterns.
Our REAR kit converts to either 4/110mm or 4/115mm. The FRONT kit converts to either 4/144mm or 4/156mm.
Like most other eBay items, you are using this "as-is" kit at your own risk, with no warranty expressed or implied. By bidding, you are agreeing to these conditions. As you can see from our feedback, we can be very helpful if you have questions before or after your purchase, and we will do everything we can to make sure you are as thrilled with this conversion kit as we are. We are thrilled with the performance of this kit, and excited that so many others have enjoyed it as well. You won't be disappointed!!! As you can see from our feedback, these kits are for real, and we are very fair & honest people to work with!! Shipping & handling (including other fees) is $10 for anywhere in the US.
The goal of Diamond J Customs is to develop and offer products that add performance to the ATV without the enormous price tag found on other ATV aftermarket products. We do this by designing kits that will allow use of as many stock components as possible, and allow you to mount higher performing parts from other ATV’s on your model. These parts are often available at reasonable prices on eBay, saving you money. We've sold literally hundreds of these kits to other “Quad Fanatics” and from the feedback from customers on eBay, you can see that they have been more than satisfied with the products. We work hard to design products that maximize the performance of your ATV while keeping prices as low as possible. Safety is not something that will be compromised.
On Jan-04-09 at 10:34:02 PST, seller added the following information:
Sellers: Delight buyers. Get your own map of past buyers.