Please see our eBay store for other items Cazier-Products on eBay
Tools Needed:
Screwdriver
Parts Supplied:
FP022-1 Clear Bushing Assembly
1. Remove the top section of the pole by holding in the button and extending the
section upwards and out of pole # 2.
2. Remove the tube #2 clear bushing by depressing the two clear tabs while
pulling the clear bushing up and out of the pole section. Note the alignment of
the old bushing.
3. Align and insert the new clear bushing into the tube section.
4. Place tube #1 back into the main tube assembly. Lower it slowly until the
button pops out of the hole in tube 2. Be sure to line up the slot in the
bottom cap with the track on the inside of the tube.
5. Test the flagpole for proper operation.
Outside Diameter of bottom 1.75"