\\\\\\\\
=== MUST READ
=== ////////
THESE ARE PLANS ONLY.
The steam / air engine itself is NOT FOR SALE just the plans to build it.
FOR SALE
Plans for building the steam / air engine shown in the picture of this ad.
At 1 psi, it is nearly silent
Crank it up and it power chugs!
Just like the big boys!
Don’t let the others fool you with multiple plans on one CD.
Most do not even show what their plans are for and you are not going to get what you want.
*** Trust me I have been there ***
These plans are my CAD drawings on 8-1/2” x 11” size paper for easy use.
These plans will build the steam engine shown in the pictures of this ad.
These prints are as simple as they can get.
About the engine
It is a two stroke, stationary, horizontal engine.
It has a 1” piston, 1-1/2” stroke and a large 4-1/2” diameter flywheel.
I have seen others with the same bore and stroke that claim to have one horsepower at 20 psi,
I run this one with compressed air just to keep it clean.
Sure, you can run things with it
I like to rev it up to 10 psi, and then down again just to see how slow it can go.
My own designed -- slotted cylindrical slide valve -- powers the piston in both directions.
I think it’s therapeutic. My friend calls it brain medicine.
While building the engine I drew up the CAD models.
I did the CAD drawings later cross checking everything with the engine as I went along.
It’s my own creation built just from pictures and memories from threshing shows past.
THIS THING IS BUILT TOUGH
Again, these drawings are as simple as they can get.
------- YOU CAN DO THIS -------
The 3 & 4 view drawings show one component per 8-1/2” x 11” size print.
I did this to eliminate any confusion. I hate large confusing assembly drawings.
The plan is you take one print per day.
Each component only takes on average of 1 to 2 hours to build.
Before you know it, you will have an engine that runs superb.
It’s so classy you’ll want to display it on your mantle.
What a conversation piece it is.
I built mine after work an hour or two at a time.
As soon as word got out that I had it running, there was a steady stream of people coming in to see it.
One person stated, “You need to enter it in a show and you’ll be guarantied to win.”
I am thinking to myself, oh yea that is just what I need, a blue ribbon.
No castings or foundry work needed.
All the materials are off the shelf cold rolled steel and brass from my local steel yard.
All the hardware was from local hardware stores.
The wood base is oak pallet wood that was being thrown out.
A little sanding and some all in one stain & varnish and you have a masterpiece that looks stunning.
Included with the plans are.
Notes on assembly, timing, start-up and break-in, and techniques on how I built certain components.
DON'T SETTLE FOR THE HIGH SCHOOL
OSCILLATING TYPE ENGINE
THIS IS THE REAL THING AND JUST AS EASY TO BUILD
WARNING
I designed and built this engine to resemble the old classy machines.
It has no guards on any of the moving parts. In the past, the old threshers had no guards either.
What I am trying to say is use common sense.
Wear safety glasses and do not go putting 6000 psi, to this thing trying to get 500 horsepower out of it.
You could lose an eye or something worse.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS AD AND THE PACKET BEING SOLD IS THE SOLE PROPERTY OF THE SELLER.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF THE SELLER IS PROHIBITED.
I THE SELLER ASSUME NO RESPONSIBILITY IN WHAT THE BUYER DOES.
The buyer, builder & persons assembling this steam / air engine sold in this packet shall
assume all responsibilities in the construction and running of this engine.
PLEASE NOTE THESE ARE PLANS ONLY.
The steam / air engine itself is NOT FOR SALE just the plans to build it.
FAST SHIPPING
Anywhere in the World
Please read our feedback reviews.
All my buyers have been very satisfied with this purchase.
Some have sent me pictures and even videos of their engines, during and after they have finished.
================================
Well over 300 sold with 100% positive feedback.
Remember these are plans only.
****** ******
Any Questions are welcome
Thank you for looking at our ad