Brand new pick up coil 200 ohms

Repair your stator

Often unavailable from the OEM manufacturer

All products shipped are tested

Brand new pick up coil 200 ohms

• We offer a brand new pickup/pulsar coil for you to repair your stator.
• Often unavailable from the OEM manufacturer
• All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Honda TRX 680 Rincon -- 2006-2014

31120-HN8-A60
31120-HN8-A61
31120-HN8-A62

Dimensions:
Height: 18 mm
Length: 25 mm
Width: 22 mm

Other specifications:
Number of wires: 2
Number of pins: 2

Wire to wire resistance: Blue to Green = 200 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010??.
• If no spark or erratic spark, switch the wires at the plug.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.