Stator for Polaris Ranger 500 Series 10 6x6 2000-2003 | OEM Repl.# 3086984




Important Notes
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
There are two possible stators for many Polaris models :
- For the Magnum 500, Big Boss 500, Scrambler 500 and Sportsman 500 2000. This stator fits S# 00-01961 and after. For S# 00-01960 and before, the right stator is RM01007.
- There are two possible stators for many 2002-2003 Polaris models. This stator has a rectangular 2x2-pins rubber connectors. For the 4-pins plastic connector stator, the right stator is the RM01058.
Always check in the 'Fits models' section and please compare to your original part before buying.
Vehicle models fitment
Polaris Ranger 500 Series 10 4x4 -- 2003
Polaris Ranger 500 Series 10 6x6 -- 2003
OEM part replacement
3086984
Specifications
Dimensions :
Interior diameter : 48 mm
Exterior diameter : 115 mm
Thickness : 20 mm
Length of wires stator to grommet : 135 mm
Length of wires grommet to plug : 1200 mm
Length of pickup coil's wire to grommet : 120 mm
Other specifications :
Number of wires : 9
Number of plugs : 7
Number of pins : 9
Wire to wire resistance :
Alternator : Yellow/Red to Yellow = 0.4 ohms +/-20%
Pickup : White/Red to White = 130 ohms +/-20%
Source : Red to Black = 20 ohms +/-20%
instructions
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Item Delivery
Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.

find parts for :