Stator for Kawasaki KRF 750 Teryx FI 4x4 2008 2009 2010 2011 2012 # 21003-0099

$207.89
Brand
RMSTATOR
Manufacturer Part Number
RM01231--U--K
OE/OEM Part Number
21003-0071, 21003-0099, 21003-0077
Manufacturer Warranty
2
condition
New

Stator for Kawasaki KRF 750 Teryx FI 4x4 2008-2012 KRF750 | OEM Repl.# 21003-0071 / 21003-0099

 
KEY FEATURES
 

Brand new generator stator direct replacement

Highest grade lamination materials

Highest grade copper windings resistant to 200 degrees celsius

All products shipped are tested

DESCRIPTION

 

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Brand new generator stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Connector included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Vehicle models fitment
 

Kawasaki KRF 750 Teryx -- 2008-2012

OEM part replacement
 

21003-0071
21003-0099
21003-0077

Specifications
 

Dimensions:
Interior diameter: 55mm
Exterior diameter: 115 mm
Thickness: 18mm
Length of wires stator to grommet: 155mm
Length of wires grommet to plug: 740mm

Other specifications:
Number of wires: 3
Number of plugs: 3
Number of pins: 3

Wire to wire resistance:
Alternator: = 0.4ohms +/-20%

instructions
  Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

SHIPPING

 

We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.

Videos