Brand new 12-Poles replacement stator

Two stators exists for the TRX 300 Fourtrax (12-Poles & 18-Poles). Our stator replaces the 12-Poles stator. Please check your original stator before buying.

Highest grade copper windings resistant to 200 degrees celsius

All products shipped are tested

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Two stators exists for the TRX 300 Fourtrax (12-Poles & 18-Poles). Our stator replaces the 12-Poles stator. The 18-Poles stator is RMS010-104213. Please check your original stator before buying.

Brand new 12-Poles replacement stator

• Direct replacement to your original unit
• Plug-and-play, direct fit, easy installation.
• Highest grade lamination materials
• Highest grade copper windings, resistant to 200 degrees Celsius.
• Pick up pulsar coil included
• Connector included
• Rubber grommet included
• All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Honda TRX 300 Fourtrax -- 1988-1990, 1992-2000
Honda TRX 300 FW Fourtrax -- 1988-1990, 1992-2000

31120-HC4-004
31120-HC4-014

Dimensions :
Interior diameter: 34mm
Exterior diameter: 88mm
Thickness: 15mm
Length of wires stator to grommet: 65mm
Length of wires grommet to plug: 290mm
Length of pickup coil's wire to grommet: 25mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6

Wire to wire resistance :
Alternator: Yellow between each Yellow = 0.4 ohms +/-20%
Pickup: Blue/Yellow to Green = 335ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010??.

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.

If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.