|
|
|
|
|
|
|
Fitment:
- Chevrolet City Express 15-18 L4 2.0L 1997cc
- Nissan Cube 2012 L4 1.8L 1798cc Exc. Calif. Hitachi PMGR, 10T
- Nissan Cube 2013 L4 1.8L 1798cc Exc. Calif.; To 12/2012 Hitachi PMGR, 10T
- Nissan Cube 11-14 L4 1.8L 1798cc Exc. Calif.
- Nissan Cube 2013 L4 1.8L 1798cc Exc. Calif.; From 12/2012
- Nissan Cube 09-10 L4 1.8L 1798cc
- Nissan Juke 2012 L4 1.6L 1618cc Hitachi PMGR, 10T
- Nissan Juke 11-17 L4 1.6L 1618cc
- Nissan NV200 2016 L4 2.0L 1997cc From 05/2016
- Nissan NV200 2016 L4 2.0L 1997cc To 05/2016
- Nissan NV200 13-19 L4 2.0L 1997cc
- Nissan Sentra 17-19 L4 1.6L 1618cc
- Nissan Sentra 2016 L4 1.8L 1798cc 110cid From 12/2015
- Nissan Sentra 2016 L4 1.8L 1798cc 110cid To 12/2015
- Nissan Sentra 13-19 L4 1.8L 1798cc 110cid
- Nissan Sentra 2012 L4 2.0L 1997cc 122cid Exc. Calif. Hitachi PMGR, 10T
- Nissan Sentra 2010 L4 2.0L 1997cc 122cid Exc California, To 08/2009
- Nissan Sentra 2011 L4 2.0L 1997cc 122cid Exc. Calif.
- Nissan Sentra 2010 L4 2.0L 1997cc 122cid Exc. Calif.; From 08/2009
- Nissan Sentra 2009 L4 2.0L 1997cc 122cid From 9/2008, Exc California
- Nissan Sentra 2009 L4 2.0L 1997cc 122cid To 9/2008
- Nissan Sentra 07-08 L4 2.0L 1997cc 122cid
- Nissan Versa 2010 L4 1.8L 1798cc S Models
- Nissan Versa 2010 L4 1.8L 1798cc SL Models From 09/09
- Nissan Versa 2010 L4 1.8L 1798cc SL Models To 09/09
- Nissan Versa 2012 L4 1.8L 1798cc Hitachi PMGR, 10T
- Nissan Versa 07-11 L4 1.8L 1798cc
- Nissan - China Livina 2010 All A.T.; 2WD 1.8L MR18DE
- Nissan - China Livina 2010 All M.T.; 2WD 1.8L MR18DE
- Nissan - China Qashqai 08-12 All CVT; 2WD 2.0L MR20DE
- Nissan - China Qashqai 07-12 All CVT; 4WD 2.0L MR20DE
- Nissan - China Qashqai 07-10 All M.T.; 2WD 1.6L HR16
- Nissan - China Qashqai 11-12 All M.T.; 2WD 1.6L HR16DE
- Nissan - China Qashqai 10-12 All M.T.; 2WD 2.0L MR20DE
Specifications:
- Design / Type:PMGR
- Voltage:12
- kW:1.0
- Rotation:CW
- Tooth Count:10
Part Number:
- GM:19317693
- Nissan, Infiniti: 23300-CK800, 23300-EN200, 23300-EN200R, 23300-EN20A, 23300-EN20B, 23300-EN20D, 23300-EN21ARE, 2330M-EN21ARW, 23300-EN20C, 23300-EN20E, 2330M-EN22ARW, 23300-EN22B, 23300-EN22BRE, 2330M-EN22BRW, 23300-EN22C, 23300-EN22A, 23300-EN22ARE
- Renault: 7701065384, 8201268221
- Hitachi: HST-114902BSH, HST-114922, S114-902, S114-902A, S114-902B, S114-902BSH, S114-902C, S114-902E, S114-902R, S114-922, S114-955, S114-955A, S114-955C, S114-955D, S114-955B
- Marelli: 063280082010
- Lester: 17982, 17449, 19295, 19266
- Arrowhead: SHI0166
- BBB Ind: 17982
- Bosch Remanufactured: SR2300X
- Carquest: 17982S
- TYC: 1-17982
- Remy Remanufactured: 16080
- J & N Automotive: 410-44067
- MPA: 17982
- NAPA: 244-8548
- Wilson: 91-25-1192
- Dixie Electric: S-80300
- Excel: 21529
- Hitachi Reman: STR0021
- Andre Niermann: 014902
How to Change a Starter?
- Disconnect the car battery and locate the starter under the hood.
- Disconnect the wiring from the starter’s solenoid (terminal).
- Unscrew the retaining bolts that hold the starter in place and remove it.
- Slide a new, identical starter into position where the old one was.
- Reinsert the retaining bolts and reconnect the wiring and battery.
Starter Motor components & their functions:
- Armature
The armature is an electromagnet, mounted on the drive shaft and bearings for support. It is a laminated soft iron core which is wrapped with numerous conductors loops or windings.
- Commutator
The commutator is a section of the shaft at the rear of the housing on which the brushes run to conduct electricity. The commutator is made up of two plates attached to the axle of the armature. These plates provide the two connections for the coil of the electromagnet.
- Brushes
The brushes run on a section of the commutator at the rear of the housing, making contact with the contacts of the commutator and conducting electricity.
- Solenoid
The solenoid contains of two coils of wire that are wrapped around a moveable core. The solenoid acts as a switch to close the electrical connection and connects the starter motor to the vehicle's battery.
- Plunger
The plunger works by using the connected vehicle battery and the solenoid to push the plunger forward, which engages the pinion.
- Lever Fork
The lever fork is connected to the plunger so when the plunger is pushed forwards, so is the lever fork. This process then activates the pinion.
- Pinion
The pinion is a unique combination of a gear and springs. Once the starter is engaged the gear is extended into the gearbox housing and is engaged with the flywheel. This spins the engine to begin the combustion process.
- Field Coils
The housing holds the starter fields in the housing with screws. This can consist of two to four field coils connected in series. Energised by the battery this converts the coils into an electromagnet which then turns the armature. When the armature coils are powered a magnetic field is created around the armature.
Item Specifics | |
---|---|
Brand | CSDEX |
Manufacturer Warranty | 1 Year |
Number of Teeth | More Than 7 |
Type | Starter Motor |
Voltage | 12 V |
Power Rating | 1.0 kW |
Features | Clockwise Rotation |
Manufacturer Part Number | 12367108 |
OE/OEM Part Number | 17982S, 1-17982, 16080, 410-44067, 244-8548 |
Performance Part | Yes |
Vintage Car Part | No |
Universal Fitment | No |
Custom Bundle | No |
Interchange Part Number | 17982, 17449, 19295, 19266, SHI0166, SR2300X |
Starter Type | PMGR |
Non-Domestic Product | No |
Modified Item | No |
Fitment Type | Direct Replacement |
PayPal and other payment are accepted.
