|
|
|
|
|
|
|
|
|
|
Fitment：
- Honda Civic 2001-2005
- Acura EL 2001-2005
How to Change a Starter?
- Disconnect the car battery and locate the starter under the hood.
- Disconnect the wiring from the starter’s solenoid (terminal).
- Unscrew the retaining bolts that hold the starter in place and remove it.
- Slide a new, identical starter into position where the old one was.
- Reinsert the retaining bolts and reconnect the wiring and battery.
Starter Motor components & their functions：
- Armature
The armature is an electromagnet, mounted on the drive shaft and bearings for support. It is a laminated soft iron core which is wrapped with numerous conductors loops or windings.
- Commutator
The commutator is a section of the shaft at the rear of the housing on which the brushes run to conduct electricity. The commutator is made up of two plates attached to the axle of the armature. These plates provide the two connections for the coil of the electromagnet.
- Brushes
The brushes run on a section of the commutator at the rear of the housing, making contact with the contacts of the commutator and conducting electricity.
- Solenoid
The solenoid contains of two coils of wire that are wrapped around a moveable core. The solenoid acts as a switch to close the electrical connection and connects the starter motor to the vehicle's battery.
- Plunger
The plunger works by using the connected vehicle battery and the solenoid to push the plunger forward, which engages the pinion.
- Lever Fork
The lever fork is connected to the plunger so when the plunger is pushed forwards, so is the lever fork. This process then activates the pinion.
- Pinion
The pinion is a unique combination of a gear and springs. Once the starter is engaged the gear is extended into the gearbox housing and is engaged with the flywheel. This spins the engine to begin the combustion process.
- Field Coils
The housing holds the starter fields in the housing with screws. This can consist of two to four field coils connected in series. Energised by the battery this converts the coils into an electromagnet which then turns the armature. When the armature coils are powered a magnetic field is created around the armature.
| Item Specifics | |
|---|---|
| Brand | CSDEX |
| Manufacturer Warranty | 1 Year |
| Number of Teeth | 9 |
| Type | Starter Motor |
| Voltage | 12 V |
| Power Rating | 0.8 kW |
| Features | Clockwise Rotation |
| Manufacturer Part Number | 12499246 |
| OE/OEM Part Number | 17845 STR-8281 31200-PLR-A01 31200-PLR-A02 DJDE4 DSDEU 410-52174 |
| Performance Part | Yes |
| Weight | 3.105kg |
| Vintage Car Part | No |
| Universal Fitment | No |
| Custom Bundle | No |
| Interchange Part Number | 428000-0320 428000-0321 2-2331-ND SND0578 113704 228000-9641 |
| Starter Type | PMGR |
| Package | 25.00(L)*15.00(W)*13.00(H)CM |
| Non-Domestic Product | No |
| Modified Item | No |
| Fitment Type | Direct Replacement |
PayPal and other payment are accepted.
