Fast & Free US Shipper
Choose your Size & Quantity using the dropdown menus
When you choose your size, the corresponding photo will update showing you the actual product photos and technical drawings including measurements
See our guide table below for drive size conversions
- A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut. It is a nut with a nylon collar insert that resists turning. The plastic insert is placed at the end of the nut, and its inner diameter (ID) is slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, but threads are not cut into the nylon. The nylon insert locks the nut by friction against the screw under the applied radial compressive force.
- Our nylon lock nuts are made from high quality stainless steel grade 18-8 (304) which offers a superior level of chemical and corrosion resistance that will out perform and out last all zinc plated fasteners for years with out the need to perform costly and time consuming maintenance that will not succumb to scaling or rust while also providing good shock and impact resistance in extreme temperatures.
|
|
Size |
Drive Size |
|
Nylon Insert Hex Lock Nuts |
1/4''-20 |
7/16” Socket |
|
5/16''-18 |
1/2” Socket |
|
|
3/8''-16 |
9/16” Socket |
|
|
1/2''-13 |
3/4” Socket |
|
|
3/4''-10 |
1-1/8” Socket |
|
|
10#-24 |
3/8” Socket |
|
|
10#-32 |
3/8” Socket |
|
|
6#-32 |
5/16” Socket |
|
|
8#-32 |
11/32” Socket |