SquareD 135-175 PSI Air Compressor Pressure Switch Control Valve 9013FHG42J59M1X

Slide Slide Slide Slide Slide Slide Slide
$62.65
Brand
Square D
condition
New


Brand New !!!

SQUARE D PRESSURE SWITCH  9013FHG42J59M1X

135-175 PSI   -   WITH UNLOADER & ON/OFF LEVER

1/4" FEMALE NPT SINGLE PORT CONNECTION TYPE.

UNLOADER IS 1/4" COMPRESSION DESIGNED TO FIT COPPER OR NYLON TUBING.

NEW SQUARE D PRESSURE SWITCH MADE BY PUMPTROL. DESIGNED TO BE USED WITH 2 STAGE 135-175 AIR COMPRESSORS. IF YOUR APPLICATION DOES NOT REQUIRE THE UNLOADER, SIMPLY DO NOT CONNECT IT AND YOUR COMPRESSOR WILL STILL FUNCTION PROPERLY.


TECHNICAL INFO SHOWN BELOW

Range of product Square D Pumptrol
Pressure sensor name 9013FH
Pressure sensor size 200 psi
Value of setting Off at 175 psi
Electrical circuit type Power circuit
Product specific application Control small electrically driven air compressors
Quantity per set 1
Type of packing Individual

Complementary

Pressure sensor type Electromechanical pressure switch
Controlled fluid Air (-22...257 °F)
Adjustable range on rising pressure 100...200 psi
Approximate adjustable differential 40  psi
Destruction pressure 220 psi
Pressure actuator Diaphragm
Pressure switch type of operation Regulation between 2 thresholds
Scale type Fixed differential
Setting Internal
Local display Without
Contacts type and composition 2 NC, snap action, DPST-DB, Form YY
Cable entry number 2 0.88 in cable entries with 0.84 in across flats UL 508
Electrical connection Screw-clamp terminals, clamping capacity: 5.261 mm²
Screw-clamp terminals, clamping capacity: 10 AWG
Fluid connection type 0.25 inch NPSF internal conforming to UL 508
Short circuit protection 20 A by cartridge fuse, type gG
Materials in contact with fluid Nitrile (Buna-N) or equivalent rubber diaphragm
Zinc plated steel or equivalent flange
Material Noryl thermoplastic resin or equivalent cover
Polypropylene cover
Operating position Any position
Motor power kW 0.75 kW (1 hp) at 575 V AC, 3 phases
0.75 kW (1 hp) at 460 V AC, 3 phases
2.2 kW (3 hp) at 230 V AC, 3 phases
1.5 kW (2 hp) at 115 V AC, 3 phases
1.1 kW (1.5 hp) at 115 V AC, 1 phase
1.5 kW (2 hp) at 230 V AC, 1 phase
Electrical durability 100000 cycles at 10 cyc/mn
Mechanical durability 300000 cycles
Terminal block type 4 terminals
Operating rate 10 cyc/mn
[Ui] rated insulation voltage 575 V conforming to UL 508
Product weight 1 lb(US)
Repeat accuracy +/- 3 %
Terminals description ISO n°1 L1-T1
L2-T2
Width 3.1 in
Height 3.71 in
Depth 3.76 in
Factory modification 2-way pressure release valve
Maintained manual cut-out lever (AUTO-OFF)