These kits contain parts for you to install in your Spirit Halloween Deluxe Ghost Trap (and Pedal).
Some filing/drilling is needed for some of the part installations.
NO SOLDERING! All electrical connections have cable assemblies with the proper connectors enabling plug-n-play!
Note: Spirit Halloween Deluxe Ghost Trap and Pedal are NOT included. Some images are of the Trap and Pedal with the upgrade kits installed and are for reference only. Some images include multiple upgrades, so see the description below to make sure you choose the upgrade kit(s) that include the parts you want to install in your trap / pedal.
Kit Included Parts Description:
##########
# Trap only #
##########
Trap Bar Graph Upgrade
This is the same set of parts as what are included in the Standard and Deluxe upgrade kits, just available as a separate item.
* laser cut segment display
* laser cut light-diffusion material
* 3D printed black alignment/mounting plate
* 3D printed clear amber LED dome lens
Trap Standard Upgrade Kit
* Bar Graph Display Upgrade
* laser cut segment display
* laser cut light-diffusion material
* 3D printed black alignment/mounting plate * 3D printed clear amber LED dome lens
* Toggle Switch Cable Assembly Upgrade (no soldering!)
* toggle switch to match what was used on the props
* special nut to match what was used on the props
* Cable assembly to plug into Spirit circuit board
* CAL-R Resistor Upgrade
* Real CAL-R resistor
* Snap in 3D printed base for under the CAL-R resistor
* 2x black real socket head mounting screws
* alignment marks on transfer sheet to ease installation
* Screws
* 5x black real button head screws for top plate (has the power switch and indicator)
* 2x black real button head screws to replace the plastic snap in covers on the front plate (has the 4 knobs)
Trap Deluxe Upgrade Kit
* Most of the Trap Standard Upgrade Kit parts (all but the toggle switch)
* Toggle Switch Deluxe upgrade (No soldering!)
Note: Running ultrasonic misters without water can damage the circuitry and transducer.
This toggle switch lets you turn on the trap and bypass the mister safely.
* ON is same direction as SPST switch, same function as before (Mist is enabled)
* OFF is straight up
* ON (same direction as "OFF" with the SPST switch)
Everything on, but Mist is disabled. Great for if you run out of water and still want to turn on your Trap.
Also connects a dummy load to the circuit board so the mist drive circuitry is not damaged by disconnecting the transducer.
* Cable assembly to plug into Spirit circuit board
* Linrose Indicator Assembly (no soldering!)
* Real Linrose Indicator Red Lens and Housing Assembly
* LED assembly (mounts inside the housing)
* Cable assembly to plug into Spirit circuit board
Mist Illumination Kit
* Circuit board with 3 high brightness narrow beam GREEN LEDs to light up the mist
* "Donut" shaped circuit board surrounds the mist output
* Strobes the LEDs just like the trap internal lighting
* Detachable connection cable assembly for easy electrical connection (no soldering!)
* Double sided foam tape for attachment to green translucent sheet
# Pedal Only #
############
Pedal Standard Upgrade Kit
* Ribbon Cable Upgrade
* Card Edge connector to press fit onto the Pedal's gray ribbon cable
* 3D printed mounting bracket for easy installation (no grinding or drilling!)
* 2 screws to mount the connector to the mounting bracket (Card Edge Connector has pre-drilled holes)