Spindle 3/4" Arbor Hole for Motor Grinder Shaft Right Hand Threaded 1/2" Shaft

Arbor - Spindle is made in the U.S.A. manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.

A 3/4" Arbor Hole Spindle is used to hold Wheels with 1/2" arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more.

Arbor hole on this Spindle is a 3/4" to work on 3/4" diameter shaft Grinders - Motors.   The arbor is made to be used on the RIGHT Side of the motor, with right hand threading, fastened and held on the motor shaft with 2 Allen Head Set Screws.

Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.

FEATURES:

·        Precision Quality

·        Machining is done by CNC Equipment

·       Made of Steel and Anodized Black Finish

·        Set of Allen Screw do not protrude above the main shaft of the spindle. 

·        Spindle comes with 2 Steel Machined Washers

·        Right Hand 1/2" x 20 Nickel Plated Nut

·        Quality Hardware (Washers and Screws)    

- Material: Cold Rolled Steel

- Overall Length:  4-5/64" - 103.65mm

- Arbor Body Diameter: 1-1/8" - 28.57mm 

- Spindle Body Length: 1-35/64" - 39.24mm 

- Spindle 1/2" Shaft Length: 2-17/32" - 64.2mm 

- Arbor Hole: 3/4" - 19.0mm  for Shaft Connection

- Arbor Shaft Depth: 1-1/4" - 32.0mm 

- Weight:  8.25z. - 234gr

Spindle is made to be used on a 3/4" shaft diameter and on the RIGHT Hand Side of Motor with forward direction.

SHIPPING:  Via USPS FIRST CLASS MAIL     DOMESTIC US SHIPPING FREE

 NOTE: Visit JETSTOOLS  ebay Store Listings, where you can see various sizes of Spindles, Arbors, Miniature Mandrels and Holders along with more Jewelers Equipment Tools and Supplies.  JETSINC.

B9 412 CKSP  Z M