Spark Plug Cleaner Pneumatic Sand Blaster w/ Abrasive
New in Box
Made by PMD Products
Blaster removes carbon build up on plugs, or will thoroughly dry a flooded plug (blow-off mode)
- 2 Position cleaning, position 1 for rigorous abrasive cleaning and position 2 for air blow-off
- Mounting flange to attach to workbench, All Metal Construction
- Include Abrasive Media and Manual (Abrasive media is in a bag inside the tool upon opening the tool)
- 1/4" NPT inlet, recommended 90 PSI, Air consumption 7.7 CFM
- se to remove performance hindering carbon build up from spark plugs, Works with all spark plug types and sizes
- NOTE- when unpacking the tool, the abrasive is inside of the dust bag
INCLUDES ABRASIVE MATERIAL
Use Instructions:
Connect tool to your air source through air adapter (included), insert spark plug in end, push blaster button for a few seconds, switch lever to blow off mode, push blaster button again to apply air for another few seconds to clean the media from around the porcelaine of the plug and remove cleaned spark plug
Details:
Cleaner tool has 2 positions, position 1 for rigorous abrasive cleaning and position 2 for air blow-off Mounting flange to attach to workbench Brass air adapter included Air consumption 7.7 CFM 3/8" hose recommended use 1/4" NPT inlet, recommended 90 PSI Works with all spark plug types and sizes Overall dimensions: 8-1/16" L x 2-9/16" W x 3/4" diameter
See our other listing for the spare or extra spark plug blaster media
- 2 Position cleaning, position 1 for rigorous abrasive cleaning and position 2 for air blow-off
- Mounting flange to attach to workbench, All Metal Construction
- Include Abrasive Media and Manual (Abrasive media is in a bag inside the tool upon opening the tool)
- 1/4" NPT inlet, recommended 90 PSI, Air consumption 7.7 CFM
- se to remove performance hindering carbon build up from spark plugs, Works with all spark plug types and sizes
- NOTE- when unpacking the tool, the abrasive is inside of the dust bag
INCLUDES ABRASIVE MATERIAL
Use Instructions:
Connect tool to your air source through air adapter (included), insert spark plug in end, push blaster button for a few seconds, switch lever to blow off mode, push blaster button again to apply air for another few seconds to clean the media from around the porcelaine of the plug and remove cleaned spark plug
Details:
Cleaner tool has 2 positions, position 1 for rigorous abrasive cleaning and position 2 for air blow-off
Mounting flange to attach to workbench
Brass air adapter included
Air consumption 7.7 CFM
3/8" hose recommended use
1/4" NPT inlet, recommended 90 PSI
Works with all spark plug types and sizes Overall dimensions: 8-1/16" L x 2-9/16" W x 3/4" diameter
See our other listing for the spare or extra spark plug blaster media