Provided in this lot are as shown above and stated below:
ME6A29............as item 33, the front oil seal.
ME7A97............as part of item 11, 1/2" anvil socket retaining ring with black o'ring.
ME7B3..............as parts of item 36, 2 black o'rings.
ME7B91............as item 38, the o'ring for the front air motor end plate.
ME11A3J...........as item 39, the front rotor support bearing.
ME6A12............as item 32, the front end plate air motor oil seal.
IM510030A-6V...as item 20, the 6 vane rotor set for this tool.
ME11A45..........as item 40, the rear rotor support bearing.
IM6100-3..........as item 3, the end cap gasket, an obsolete Snap on item.
ME7B52............as item 37, regulator valve o'ring.
IM6100-22........as item 17, the throttle valve seat. The white seat with raised tab is obsolete so that the old red angled stem trigger valve can be reused with a new seat. *An alternative black trigger valve and black trigger valve seat are easier to use and are are also provided until my inventory of obsolete white valve seats is exhausted.
IM6100-33........as item 23, a muffler.
IM6500HP20.....as item 16, the trigger valve, aka throttle valve. **NOTE the white valve seat has a raised white tab that must be positioned at 9:00 as you are looking down into the handle volute for proper sealing to take place. The valve or seat can be damaged from improper installation procedure. IM6100-20 part number was the original part number as shown on the sheet.
ME1A226..........as item 25, the trigger valve spring, throttle valve spring, now obsolete.
ME7B68............as the o'ring seal for item 34, ME6F6 bushing assembly.
The shipping weight is 4 ounces eBay USPS.com Ground Advantage shipping label and tracking. Ground Advantage is the slowest and cheapest shipping method offered on eBay. International buyers have this item shipped to Glendale Heights, Illinois for additional processing costs through the eBay Global Shipping Program.