Single Screw Ceramic Clay Mixer Mud Mixing Squeezing Machine Extruder 2.3in Dia.

The mud machine is mainly used to evenly mix clay and other raw materials to make mud suitable for the production of pottery products.

Through its precise mixing and mixing process, helping to remove air bubbles from the clay, making the final clay denser and improving its plasticity and formability.

The use of clay drilling machine not only improves the efficiency of pottery, ensures the quality of pottery, but also reduces manual labor, for pottery enthusiasts, the operation of clay drilling machine is simple, and it can easily produce a variety of shapes of pottery.

In addition, the mud machine is also suitable for other fields, such as the production of standardized concrete to ensure the quality and strength of concrete.

Function introduction：　

1, the use of fully closed design, safe, light weight, greatly reducing the noise of the machine

Installation environment requirements：

1. The equipment should be placed on a cool, ventilated, dry, dustproof and good level ground;

2. The user must install the wiring according to the safety standard of electricity consumption. Single-phase and three-phase power must be supplied by a power grid with ground wires. The device can be put into operation only when there is a grounding cable. Do not run the device without a grounding cable. Single-phase AC220V±10%;

3. Ambient temperature 0 ~ 50 degrees Celsius, no corrosive and no strong electromagnetic field radiation occasions;

4. The working area of the equipment should maintain air circulation to avoid overheating and burning the motor.

5. Arrange power cables and sockets correctly;

6. Do not place any items on the machine itself; 

Note：

1, dry mud can not be put into the bucket, recycling mud can not have garbage and debris.
2, the mud is not used for a long time, it should be started every half a month.
3, do not put debris, or hand into the mud mouth, to avoid accidents!
 

Item Number: 300465