SGE 150 Gas Mask (Made in 2024) Sealed, Size Med/Large
with 40mm NATO NBC/CBRN Filter Exp 2028
with 40mm NATO NBC/CBRN Filter Exp 2028
(Latest shipment just arrived with new 2024 production !!! All made/assembled in 1st quarter of 2024)
- 40mm NATO Standard Threaded Filter Connection - works with ALL standard NATO filters
- SGE150 Face Seal made from highly chemical resistant butyl-rubber
- Soft inner orinasal provides exceptional comfort, made from medical grade silicone rubber
- Quick release harness with six adjustable straps
- Controlled air flow prevents fogging of the visor.
- Extremely durable polycarbonate visor has been tested to resist a 1/4 inch steel ball, that was propelled at 335 MPH without cracking or damaging the face shield
- The mask was also tested for heat resistance and will not catch fire or melt at 800 Degrees C (1472 F) for 5 Sec. or 200 degrees C (372 F) for a duration of 6 Min
- Tecnopro full face masks meet the requirements of EN 136 and are CE marked Tecnopro SGE-150 full facemasks can be used with all standard 40mm NATO threaded filters in compliance with EN 148-1 (DIN 3183) and with powered respirators and airlines
- Visor is made of impact resistant Polycarbonate
- Inner mask is made of Anallergic silicone and rubber face seal
- Total weight is 530 grams Produced under strict ISO 9002 quality standards for maximum reliability & safety. When used with NBC rated filters, this mask is certified by the manufacturer to provide NBC protection.
Q & A
Q: Can the SGE150 be connected with a Camelbak hydration system to allow drinking while using the mask?
A: Hi there, the 150 is designed to be a very good but less costly variant/model of SGE mask. For that reason, it is the only model that does not have the option to have it made with a drinking capability. The 400 is the next one up & it can be gotten with drinking system; You can take the screw cap that connects to the top of the canteen cap and add it to the Camelbak to make a working system; You do need to get the 400 with drinking system though (or 400/3 or other model WITH the drinking feature installed) to do that... Overall all models utilize the same design & clear polycarbonate face shield, so all are very good but the 150 cant be produced with the drinking system installed. The other differences on the 400, 400/3, etc. are a more chem & scratch resistant coating on the lens thats not done on the 150's & the facial seal on the higher models is made from a more comfortable (but still chem resistant) medical grade silicone rubber blend vs the 150 has a butyl rubber facial seal (still good, & highly chemical resistant), but not as comfy. Thanks for you interest, hope this helped you figure out what will work best for you!!
Copyright 2011 - 2024, CBRN Systems, LLC - All rights reserved.
Copyright 2011 - 2024, CBRN Systems, LLC - All rights reserved.