Product Description
Compact, automatic, fully submersible electric pump
Built-in float switch! (No separate float switch is needed)
Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
No power use until pump is activated by internal float switch (when water level rises)
Compact, efficient, long life motor
Rustproof and corrosion resistant
Stainless steel shaft
High-impact durable plastic housing
Quick release strainer for easy maintenance
Extremely efficient, very low current draw and offer high capacity output
Water cooled long-life motors
Ignition protection to protect the pump against high current
Water/moisture tight seals
Silent and vibrationless operation
Anti-air lock protection
Will not burn out when run dry
Integrated float switch TEST button at rear of unit
Can be used with switch panel for manual override
Includes comprehensive user manual with installation instructions and wiring diagram
Specifications
Voltage: 12V DC
Flow capacity: 1100 Gallons per hour
Max. delivery head: 4 metres (height of vertical water flow up pipe)
Current draw: Only 8.5 Amp
Hose Outlet: 29mm (1-1/8")
Dimensions: Length 145mm (5.71") x Width 83mm (3.27") x 103mm (4.05")
3-wire lead, approx. 1m long
Approvals: CE
Applications
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
