Ripper Attachment For 1ton to 1.5ton Mini Excavator Small Digger
Item description：
- Made specially For mini-excavators, this ripper attachment can be used for most other heavy equipment and below. Size of pin is ∮25*160, making suitable for use with other brands of machines.
- Using special tips on the end of its arms, the ripper can cut through almost any object with minimal effort from the operator
- Rippers allow you to cut down large trees and shrubs with relative ease and remove small stumps of any size. They’re also great at ripping through things like old barbed wire and other materials that would be very difficult to remove any other way.
- Used for the crushing and splitting of hard soil, sub-hard stone, and weathered stone. This makes up for the low efficiency of the breaker and the working environment that the bucket cannot so
measurements:
Length: 18.8in/480mm
Width: 9.8in/250mm
Tooth Width: 1.9in/50mm
Pin Dia: 0.98in/25mm
Span: 3.54in/90mm
Material: Alloy Steel
Important Reminder：
There will be a certain error in manual measurement of the overall size of the product. Due to the importance of the size of the connection, the error is only 1-3mm/0.04-0.12in
Note:
Please check the pictures carefully before buying to determine whether these products are what you need.
Communication is the best way to solve the problem. If you have any problems after purchasing, please contact us in time before opening return or case.
We will try our best to provide the best customer service.
Have a great day!