BOLL CAVITY WAX SPRAY WHITE (CLEAR) + extension nozzle
Agent on the base of wax perfectly protecting against water, salt and rust.
Very efficient, perfectly penetrating.
PROPERTIES
The preservative for closed profiles (such as doors, bonnet, thresholds, etc.) is a wax-based agent which forms a flexible layer protecting against water, salt and rust.
It is very efficient, semi-transparent in white(clear) shade.
METHOD OF USE
Inside coating spray should be injected into existing holes in the car body using a tube included in the set.
You
can drill additional 6 mm diameter holes, If necessary.
Shake the container well for about 3 minutes before use.
After use, invert the container and spray until the valve is empty.
APPLICATION
Mix thoroughly
Apply to existing holes in the car body with the attached tube
Recommended coating thicknesses from 0. 2mm to 0. 4mm
Drying time approx. 4-5 hours at 20°C
After use, invert the container and spray until the valve is empty
STORAGE CONDITIONS
Protect the product from excessive heat and cold. A
void direct exposure to
sunlight. Store in a dry place.