The Original Rust Converter developed over 40 years ago and still recognised around the world as the best rust treatment for almost any rusted metal project.
Neutrarust 661® – This incredible British product is hailed by many as the Original and Best Rust Converter. This is the Fast Working rust treatment for professional & domestic uses.
Superior coating consistency providing high quality surface ready for primer and painting. Easy to apply and perfect for automotive applications, ships, ballast tanks, oil rigs, refineries, power stations, boat yards, bridges, pipework, railways, subframes, chassis protection, engine mountings. In fact, anywhere that corroded ferrous materials can be found. Can be used above and below the water line. A mineral acid-free rust treatment, formulated to neutralise corrosion on ferrous materials and components. It has been designed to react rapidly on ferrous corrosion, leaving a tough insoluble ready-to-paint acrylic coating, without the use of hazardous mineral acids. It is preferable, but not essential to use a good quality primer before applying topcoats that is suitable for your individual application
Supplied ready for use.
- Simple to use & converts rust to READY-TO-PAINT surface
- Neutralises the corrosion process
- Water based – Classified as non-hazardous
- Minimum surface preparation required
- Produces a hard, water insoluble hydrophobic film
- Superior smooth "wetting out" surface application
- Mineral acid free
- Compatible with most paint products
- COVERAGE: 10 to 12 square metres per litre
- Specially tested against salt spray for sea-going vessels and off shore applications
- MANUFACTURED IN THE UK
Neutrarust 661® is easy to apply, fast acting and quick drying. Remove loose scale, flaky rust, all paint and dirt with thorough wire brushing etc. Reduce any high peaks of rust. Paintwork blistered by rust should be scraped down to hard surface. Do not remove all traces of rust. Remove Acid, Alkali, grease oil and chemicals with a water based detergent wash then rinse with clean water. Failure to degrease effectively will cause flaws in the barrier.
Pour Neutrarust 661® into non metallic container. To avoid contamination, do not return unused product to the original bottle. During application of Neutrarust 661® it starts off white. Gently cross brushing for a further minute and then allow to dry for the chemical reaction and conversion of the rust surface to take place. Apply 2 or 3 thin coats directly onto rust by brush or roller. Allow approx 2 hours drying time between coats. Surplus Neutrarust 661® may cause staining of surrounding paintwork if allowed to dry. Remove surplus immediately.
Neutrarust 661® is an excellent base for paint. Leave 24-48 hours or longer to dry hard before applying. It is preferable, but not essential to use a good quality primer before applying topcoats.
The product is best stored and applied in temperatures of 5°C and 35°C. Protect from frost. It will withstand between -40°C and 60°C when dried hard. Use within 12 months of opening. Easy to clean off hands, brushes or spillages with water.
Neutrarust 661® has earned an unquestionable track record of reliability and durability worldwide.